KTI KGC-400

KTI KGC-400 media converter 2x RJ45 2x SFP

KTI KGC-400 media converter 2x RJ45 2x SFP

Lieske Part No. 2118369
Mfg Part No KGC-400
EAN-Code
Manufacturer KTI
Here only 167,58 EUR
199,42 EUR incl. VAT

Further information for KTI KGC-400 media converter 2x RJ45 2x SFP

General
Number of RJ45 ports2
RJ45 speed10/100/1000 Mbps
Number of SFP slots2
SFP speed100/1000 Mbps
SFP module typeStandard Mini-GBIC
Operating modes4P-switch mode, dual converter mode
Configurationvia DIP switch
Operating temperature range0 °C
Scope of deliverySwitching power supply
Jumbo frame supportYes
Support for 802.3x Flow ControlYes
LFPT supportYes
Loop prevention supportYes
The KTI KGC-400 is a standalone Gigabit media converter designed for connecting network segments with different transmission media. The device features two RJ45 ports with a speed of 10/100/1000 Mbps and two SFP slots designed for standard Mini-GBIC modules, supporting data rates of 100/1000 Mbps. The integrated function enables operation in both 4P-switch mode and dual converter mode, allowing for flexible network configurations. Settings are configured via DIP switches, ensuring simple and tool-free configuration. The device supports Jumbo frames, enhancing the efficiency of large data packet transmission, as well as 802.3x Flow Control, LFPT (Link Fault Pass-Through), and Loop Prevention to ensure network security and stability. The operating temperature range is between 0 °C and 40 °C, enabling use in controlled indoor environments. The device is supplied with a power adapter to ensure reliable power supply.

Applications

The KTI KGC-400 is suitable for integrating copper and fiber optic network segments in local area networks (LAN). It is commonly used in environments where extending the range via fiber optic cables is required, while end devices are connected via Ethernet cables. The support for dual speed in the SFP slots allows the use of various fiber optic modules, for example for single-mode or multi-mode connections, depending on network requirements. Functions such as Loop Prevention and LFPT are particularly useful in redundant networks to avoid loops and failure states.

Functions and Equipment in Detail

The device offers two RJ45 ports designed for 10/100/1000 Mbps Ethernet connections and two SFP slots supporting 100/1000 Mbps. The SFP slots are designed for standard Mini-GBIC modules, ensuring broad compatibility with various fiber optic modules. Configuration is performed via DIP switches located directly on the device, eliminating the need for additional software or external configuration tools. Support for Jumbo frames enables higher efficiency in transmitting large data volumes, for example during streaming or backup operations. The integrated 802.3x Flow Control ensures controlled data transmission and prevents network overloads.

Technology Explained Simply

The KTI KGC-400 acts as a bridge between copper and fiber optic network segments. The RJ45 ports allow connection to standard Ethernet devices, while the SFP slots support fiber optic cables with high range and bandwidth. The dual converter function allows one port to operate as a converter and the other as a switch port, increasing network flexibility. DIP switches enable manual adjustment of operating parameters, such as speed or duplex modes, without requiring software configuration. Functions such as LFPT and Loop Prevention contribute to network security by detecting error states and preventing network loops from forming.

Compatibility and Accessories

The SFP slots are designed for standard Mini-GBIC modules, enabling a wide selection of fiber optic modules, for example for single-mode or multi-mode connections. Compatibility with standard modules ensures easy integration into existing networks. The use of SFP modules requires separate procurement and must be selected according to specific network requirements.

Mounting and Installation

The KTI KGC-400 is designed as a standalone device and does not require rack mounting. Installation is performed by directly connecting the RJ45 and SFP ports to the respective network devices. Configuration via DIP switches is done directly on the device, eliminating the need for additional tools or software. Power supply is provided by the included power adapter, which is connected to a mains power source.

Advantages in Operation

The combination of RJ45 and SFP ports enables flexible network integration, with fiber optic cables increasing range and stability. Support for Jumbo frames and 802.3x Flow Control improves network efficiency, especially under high data loads. Integrated security functions such as Loop Prevention and LFPT ensure a stable network environment. Tool-free configuration via DIP switches reduces installation time and simplifies maintenance.
This is an offer of:

Lieske Elektronik e.K.

Reutener Str. 10
79279 Vörstetten

https://industry-electronics.com
Tel. 07666/88499-0
Fax. 07666/88499-111

Diesen Artikel finden Sie unter:
industry-electronics.com/artikel/2118369
qrcode für KTI KGC-400 media converter 2x RJ45 2x SFP