The KTI KGC-302-2FS30 is a standalone Gigabit media converter designed specifically for connecting Ethernet networks via fiber optic links. The device features an RJ45 port with a data rate of 10/100/1000 Mbps and two SFP slots, each rated for 100/1000 Mbps. These dual-speed slots enable the use of standard Mini-GBIC modules, including 100 Mbps SFP modules with single-mode LC connectors for a range of up to 30 km. The integrated fiber port redundancy enhances network security by automatically switching to the second port in case of a failure of one port. Configuration is performed via DIP switches, allowing for simple and tool-free adjustment of operating parameters. The device is designed for indoor use and operates within a temperature range of 0 °C to 40 °C. It is supplied with a power adapter that provides the necessary power supply. Included as accessory is the MAG 01, which serves for mounting or securing the device.
Applications
This media converter is suitable for networks requiring a connection between copper and fiber optic segments, for example in corporate networks, for connecting locations over long distances, or in infrastructures requiring high bandwidth and reliability. Support for Jumbo Frames enables more efficient data transfer for large packets, which is particularly beneficial in server or storage environments. The integrated fiber port redundancy makes the device suitable for critical applications where network connection interruption must be avoided.
Functions and Equipment in Detail
The device features an RJ45 port supporting transmission rates of 10, 100, and 1000 Mbps, ensuring compatibility with a wide range of network devices. The two SFP slots allow the use of standard Mini-GBIC modules, with delivery including 100 Mbps SFP modules with single-mode LC connectors for a range of 30 km. Support for 802.3x Flow Control ensures controlled data transmission and prevents network overloads. The LFPT (Link Fault Pass Through) function enables the forwarding of fault conditions to the network, supporting quick diagnosis and troubleshooting.
Technology Explained Simply
The media converter serves as a bridge between copper and fiber optic cables. While the RJ45 port connects to conventional network cables (Cat5e, Cat6, etc.), the SFP slots handle the connection via fiber optic links. The dual-speed function means that the SFP slots can operate at either 100 Mbps or 1000 Mbps, depending on the installed module. Fiber port redundancy ensures that in the event of a failure of one of the two fiber ports, the system automatically switches to the second port without interrupting the network connection. Configuration via DIP switches is tool-free and allows for quick adjustment of operating parameters such as duplex mode or speed.
Compatibility and Accessories
The device is compatible with standard Mini-GBIC modules, particularly 100 Mbps SFP modules supporting single-mode LC connectors for a range of 30 km. The integrated fiber port redundancy requires no additional modules or software, as the function is implemented in hardware. The included accessory MAG 01 is used for mounting or securing the device, for example in a rack or on a wall. No additional accessories or tools are required to put the device into operation.
Installation and Mounting
Installation involves connecting the RJ45 port to a network device such as a switch or router and inserting the SFP modules into the respective slots. Configuration is performed via the DIP switches on the top of the device, with settings adjusted according to network requirements. The included power adapter is connected to a power source to supply the device. Mounting of the device is done using the included MAG 01, which can be attached to a wall or in a rack depending on the application environment.
Operational Advantages
The use of the KTI KGC-302-2FS30 provides a reliable and flexible connection between copper and fiber optic segments. Fiber port redundancy increases network security, while support for Jumbo Frames enhances data transfer efficiency. Tool-free configuration via DIP switches reduces installation time and simplifies maintenance. The device is designed for indoor use and operates within a temperature range of 0 °C to 40 °C, making it suitable for a wide range of environments.