| General |
| Copper port type | 1x RJ45 10/100/1000 Mbps |
| Fibre optic port type | 2x SFP slot 100/1000 Mbps |
| SFP module type | Standard Mini-GBIC |
| Fibre optic module type | 100 Mbps SFP modules MM LC 2km |
| Redundancy function | Fibre optic port redundancy |
| Jumbo frames | supported |
| Flow Control | 802.3x |
| LFPT | supported |
| Configuration | via DIP switch |
| Operation temperature | 0 °C |
| Scope of delivery | Power supply, accessories MAG 01 |
The KTI KGC-302-2FM is a standalone Gigabit media converter designed for connecting Ethernet networks over different transmission media. It connects a copper port with two fiber optic SFP slots, enabling the integration of fiber optic and copper segments within a network. The converter is suitable for use in small to medium-sized networks where redundant fiber optic connections or flexible adaptation to existing infrastructure is required.
Applications
This media converter is suitable for networks requiring a connection between an Ethernet switch via copper cabling and a fiber optic backbone. It is commonly used in office and industrial applications where stable and reliable data transmission over long distances is needed. The support for fiber optic port redundancy enables higher availability by automatically switching to the second SFP port in case of a failure. This is particularly relevant in critical applications where network outages must be avoided.
Functions and Features in Detail
The KGC-302-2FM features an RJ45 port with a speed of 10/100/1000 Mbps, suitable for connecting to standard Ethernet devices such as switches or routers. Two SFP slots support dual-speed connections at 100/1000 Mbps, enabling both 100-Mbit/s and 1-Gbit/s connections. The SFP slots are designed for standard Mini-GBIC modules, including 100-Mbit/s modules with multimode LC connectors for a range of up to 2 km. Configuration is done via DIP switches, allowing for simple, tool-free setup. Support for Jumbo Frames increases efficiency when transmitting large data packets, which is beneficial in specific applications such as video transmission or database access.
Technology Explained Simply
The integrated fiber optic port redundancy ensures that in the event of a failure of an SFP module or fiber optic cable, the system automatically switches to the second port to maintain the network connection. This increases the reliability of the overall system. Support for 802.3x Flow Control enables controlled data transmission to prevent network overloads. LFPT (Link Fault Pass-Through) ensures that a fault on the fiber optic port is also indicated on the copper port, simplifying troubleshooting. The operating temperature ranges from 0 °C to 40 °C, enabling use in indoor environments under normal ambient conditions.
Compatibility and Accessories
The converter is compatible with standard Mini-GBIC SFP modules, particularly 100-Mbit/s modules for multimode fiber optic with LC connectors and a range of up to 2 km. The use of SFP modules allows flexible adaptation to existing fiber optic infrastructures. The device is supplied with a plug-in power supply to ensure reliable power.
Mounting and Installation
The KGC-302-2FM is designed as a standalone device and can be placed directly at a network location without additional mounting accessories. Configuration is performed via DIP switches located on the top surface of the device. Installation does not require special tools, as settings are adjusted manually. Cabling is done via standard RJ45 and LC connectors, which are widely used in IT infrastructure.
Operational Advantages
The combination of copper and fiber optic ports enables flexible network design. The integrated redundancy function increases network availability, while support for Jumbo Frames and Flow Control improves the efficiency and stability of data transmission. Tool-free configuration via DIP switches reduces installation effort. The device is designed for indoor use and does not require special cooling or ventilation measures within the specified temperature range.