Further information for KTI KGC-300-W3510 media converter single fiber RJ45/LC SM 10km
General
Data rate
1000 Mbps
RJ45 port
1x
SFP slot
1x
Plug connection
LC
Transmit wavelength
1310 nm
RX wavelength
1550 nm
Transmission range
10 km
Technology
WDM
SFP module included
The KTI Gigabit Media Converter KGC-300-W3510 is designed for the transmission of Gigabit-Ethernet data between a twisted-pair cable (RJ45) and a single-mode fiber cable (LC connector). The device is intended for use in networks where a connection between a copper link and a fiber optic link is required, for example, in extending LAN infrastructures over longer distances. The converter supports a data rate of 1000 Mbps and is therefore suitable for Gigabit-Ethernet networks.
Applications
The media converter is designed for use in industrial and commercial networks where stable and high-performance data transmission over fiber optic cables is required. It is particularly suitable for applications where a connection must be established between an Ethernet switch or router via copper cable and a fiber optic cable over a distance of up to 10 km. The use of single-mode fiber enables high bandwidth and low attenuation, making it suitable for backbone connections or connecting remote sites.
Functions and Equipment in Detail
The device features an RJ45 port for connecting to an Ethernet network via twisted-pair cable. In parallel, an SFP slot is integrated, into which a standard Mini-GBIC module can be inserted. The delivery includes an SFP module designed for single-mode fiber (SM) with an LC connector. The module supports a wavelength of 1310 nm for transmission (TX) and 1550 nm for reception (RX), representing a Wavelength Division Multiplexing (WDM) technology. This technology enables the use of a single fiber cable for bidirectional data transmission, thereby reducing the number of required fibers.
Technology Explained Simply
The converter operates as a bridge between two different transmission media: copper (RJ45) and fiber optic (LC single-mode). The data received via the RJ45 cable is converted into optical signals and transmitted over the fiber optic cable. Conversely, the received optical signals are converted back into electrical signals and transmitted via the RJ45 cable. The use of WDM (wavelength 1310 nm for transmission, 1550 nm for reception) enables bidirectional use of a single fiber, simplifying installation and maintenance. The maximum range is 1e km, which is sufficient for many industrial and enterprise networks.
Compatibility and Accessories
The SFP slot is designed for standard Mini-GBIC modules, ensuring high compatibility with various manufacturers. The included SFP module is designed for single-mode fiber (SM) with an LC connector and supports WDM technology. Additional SFP modules can be used as needed (e.g., different wavelengths, multimode fiber), provided they meet the technical specifications of the converter. The connection is made via an LC connector, which is widely used in fiber optic infrastructure.
Mounting and Installation
The media converter is designed for mounting in a standard 19-inch rack. Installation is done by inserting the device into a rack system, with power supplied via an external power supply. The connection cables (RJ45 and LC) are directly connected to the respective ports. Configuration typically requires no additional settings, as the converter is plug-and-play. No special software or configuration is required.
Advantages in Operation
Using the KTI KGC-300-W3510 enables cost-efficient extension of Ethernet networks over fiber optic cables without requiring additional fiber lines. The WDM technology reduces the number of required fibers, simplifying installation and maintenance. The high range of 10 km and support for Gigabit-Ethernet ensure powerful and reliable data transmission. The device is designed for networks requiring high bandwidth and stability.