| General |
| RJ45 port | 1x 10/100 Mbps |
| Fibre optic port | 1x SM WDM SC |
| Transmission distance | 40 km |
| Transmit wavelength | 1550 nm |
| RX wavelength | 1310 nm |
| Current supply | +7 to +30 VDC |
| Mounting method | DIN rail mounting |
| Housing | Fanless, metal |
| Operation temperature | Extended range |
| Latency behaviour | optimised |
The KTI Industrial Media Converter KCD-300-W5340 is designed for connecting Ethernet networks over different transmission media. It connects a 10/100 Mbps RJ45 network port with a fiber optic port designed for Single-Mode (SM) WDM transmission. The unit is designed for use in industrial environments where high robustness, reliability, and a wide operating temperature range are required. The device is mounted on a DIN rail and housed in a fanless metal housing, making it suitable for use in harsh environments.
Applications
The media converter is intended for industrial networking applications where a connection between copper and fiber optic cables is required. Typical use cases include factory networks, automation systems, building automation, or transmission links over long distances, where copper cables are insufficient due to signal loss or electromagnetic interference. The WDM technology enables the use of a single fiber optic cable for two unidirectional data streams, thus efficiently utilizing cable capacity.
Functions and Equipment in Detail
The device features an RJ45 port with a 10/100 Mbps transmission rate, which connects to existing Ethernet networks. The fiber optic port is implemented as a Single-Mode WDM SC connector and supports a transmission distance of up to 40 km. The WDM technology (Wavelength Division Multiplexing) enables simultaneous data transmission on two different wavelengths: 1550 nm for the transmit unit (TX) and 1310 nm for the receive unit (RX). This allows bidirectional communication over a single fiber optic cable.
Technology Explained Simply
The converter converts the electrical signals from the RJ45 port into optical signals transmitted over the fiber optic cable. The WDM technology ensures that two data streams are transmitted over a single fiber optic line by using different light wavelengths. This increases cable utilization efficiency and reduces the number of required fiber optic cables. The fanless metal housing protects the electronics from dust, moisture, and mechanical stress. DIN rail mounting enables quick and secure installation in standard industrial enclosures.
Compatibility and Accessories
The media converter is compatible with standard Fast Ethernet networks (10/100 Mbps) and Single-Mode fiber optic cables with SC connectors. The WDM technology requires a matching counterpart that also supports the wavelengths 1550 nm (TX) and 1310 nm (RX).
Mounting and Installation
Mounting is done on a DIN rail, which is typically found in industrial enclosures. Installation requires no special tools, as fixation is achieved via the DIN rail. Connections are clearly labeled: RJ45 port for the network and SC connector for the fiber optic cable. Power supply is connected to an external DC power source via a separate terminal.
Operational Advantages
The converter provides a reliable and stable network connection over long distances, with fiber optic transmission being immune to electromagnetic interference. The fanless design reduces maintenance requirements and prevents dust accumulation. The extended temperature range allows use in environments with extreme temperatures, such as production halls or outdoor applications. Optimized latency performance ensures fast data transmission, which is important for time-critical applications.