KTI KC-3USB

KTI KC-3USB USB power supply cable

KTI KC-3USB USB power supply cable

Lieske Part No. 2117824
Mfg Part No KC-3USB
EAN-Code
Manufacturer KTI
Here only 8,10 EUR
9,64 EUR incl. VAT

Further information for KTI KC-3USB USB power supply cable

General
Cable length100 cm
Operating voltage5 V DC
Maximum power consumption2,5/4,5 W
USB plugType A
Connection to device5V hollow pin connector
CompatibilityKTI converter of the KC-300 family and other types
The USB power supply cable from KTI, type KC-3USB, serves as a power source for electronic devices requiring an operating voltage of 5 V DC. It is specifically designed for converters from the KC-300 family as well as other compatible types. The cable enables power supply via a USB connection, with energy delivered through the network cable, which is typical for USB-2.0 and USB-3.0 connections. The maximum power consumption is 2.5 to 4.5 watts, sufficient to safely operate small electronic modules and converters.

Applications

The cable is used in applications where small electronic devices need to be powered via a USB connection. This includes particularly converters from the KC-300 family, used in industrial communication technology, signal conversion, or data transmission. The use typically occurs in environments requiring a stable 5-volt DC supply, for example in office or industrial facilities, where USB ports are used as power sources.

Functions and Equipment in Detail

The cable features a USB Type A plug at one end, which is inserted into a standard USB port. At the other end, a 5-volt hollow plug is attached, fitting directly into the corresponding socket of the device to be powered. The cable length is 100 cm, sufficient to allow flexible placement between the power supply connection and the device. Power is supplied via the USB network, with power consumption limited to a maximum of 4.5 watts to prevent overloading.

Technology Explained Simply

Power is supplied via the USB network, with a voltage of 5 V DC directly transmitted to the device. The maximum power consumption of 2.5 to 4.5 watts corresponds to a current draw of approximately 0.5 to 0.9 amperes, which is sufficient for small electronic modules. The use of USB 2.0 or USB 3.0 is possible, as both standards support 5-volt power supply. The cable length of 100 cm provides sufficient space for device placement without affecting power supply.

Compatibility and Accessories

The cable is specifically developed for KTI converters from the KC-300 family, but can also be used for other devices requiring a 5-volt DC supply via a hollow plug. No special accessories are required, as the cable is directly inserted into the USB port and the device socket.

Installation and Mounting

Installation is performed by simply inserting the USB Type A plug into an available USB port and the 5-volt hollow plug into the corresponding socket of the device. No additional tools or mounting procedures are required. The connection becomes effective immediately once the USB port is activated.

Advantages in Operation

Using a standard USB port reduces the number of required power supplies and simplifies installation. The cable length of 100 cm offers flexibility in placement, and the power consumption limit protects the device from overload.
This is an offer of:

Lieske Elektronik e.K.

Reutener Str. 10
79279 Vörstetten

https://industry-electronics.com
Tel. 07666/88499-0
Fax. 07666/88499-111

Diesen Artikel finden Sie unter:
industry-electronics.com/artikel/2117824
qrcode für KTI KC-3USB USB power supply cable