| General |
| RJ45 port type | 1x 10/100 Mbps |
| Fibre optic port | 1x SM WDM SC |
| Transmission range | 40 km |
| Transmit wavelength | 1550 nm |
| RX wavelength | 1310 nm |
| Current supply | PoE per 802.3af |
| Network standard | Fast Ethernet |
The KTI media converter KC-351-W5340 is a Fast Ethernet transmission device that connects data traffic between a Twisted-Pair network via RJ45 connection and a fiber optic network via singlemode optics. The device is designed for use in networks requiring transmission over long distances with high reliability and low latency. It features a 10/100 Mbps RJ45 port and a fiber optic port with singlemode WDM technology (Wavelength Division Multiplexing) in SC connector format, with a maximum reach of up to 40 km. The wavelengths are fixed at TX 1550 nm and RX 1310 nm, enabling bidirectional use of the fiber optic cable.
Applications
The media converter is suitable for use in industrial and infrastructure networks, for example in buildings, for connecting network segments over long distances, or in telecommunications. The WDM technology enables the use of a single fiber optic cable for bidirectional data transmission, making cable installation more efficient. The maximum reach of 40 km makes the device particularly suitable for applications in long-distance transmission or connecting sites across rural or urban areas. Optimized latency reduction ensures fast data transmission, which is beneficial for time-critical applications such as video surveillance or network management.
Functions and Equipment in Detail
The device features advanced diagnostic functions that enable quick fault detection and localization. These functions support network operation and maintenance by displaying status information about the connection, signal strength, and potential disturbances. The RJ45 interface supports transmission rates of 10 and 100 Mbps, which is sufficient for most Fast Ethernet applications. The fiber optic port is designed for singlemode fibers and uses the SC connector, which is standard in many industrial and professional networks.
Technology Explained Simply
The WDM technology (Wavelength Division Multiplexing) enables simultaneous data transmission in both directions over a single fiber optic cable by using different wavelengths for transmission (TX) and reception (RX). In this case, the wavelength 1550 nm is used for transmission and 1310 nm for reception. This reduces the required number of cables and simplifies installation. The PoE function according to 802.3af ensures that the device is powered via the network cable, simplifying installation and eliminating the need for a separate power connection. The maximum reach of 40 km is achieved with singlemode fibers, which is sufficient for many industrial and infrastructure applications.
Compatibility and Accessories
The media converter is compatible with standard Fast Ethernet networks and can be connected to any PoE-capable switch or router. The use of singlemode fiber optic cables with SC connectors is required to fully utilize the functions and achieve maximum reach.
Mounting and Installation
Installation is performed by connecting the RJ45 port to a network device such as a switch or router and the fiber optic port to a singlemode fiber optic cable with SC connector. Power supply is either via PoE or an external power supply unit, if no PoE port is available. The diagnostic functions allow for easy verification of the connection and signal quality after installation.
Operational Advantages
The use of the KTI KC-351-W5340 enables reliable data transmission over distances up to 40 km, with WDM technology optimizing cable installation. The PoE function reduces installation costs and simplifies device placement. The advanced diagnostic functions support network administration in quickly resolving faults. Optimized latency ensures smooth data transmission, especially in applications requiring low delay.