Further information for KTI KC-351-W3520 PoE media converter single fiber RJ45/SC SM 20km
General
Data rate
10/100 Mbps
RJ45 port
1x
Fibre optic port
1x
Plug connection
SC
Transmission range
20 km
Transmit wavelength
1310 nm
RX wavelength
1550 nm
PoE standard
802.3af
Latency
optimised
Diagnostic function
extended
WDM technology
PoE
The KTI media converter KC-351-W3520 is a Fast Ethernet network device that enables the transition between a Twisted-Pair connection via RJ45 and a fiber optic connection via singlemode fiber. The device is designed for use in networks requiring a connection between copper and optical transmission media, particularly in environments where high reach and low latency are required. The converter supports data rates of 10/100 Mbps and is equipped with an RJ45 port and a singlemode fiber optic port with SC connector. The fiber optic connection is designed for a maximum reach of 20 km and utilizes WDM technology with wavelengths of 1310 nm for transmission (TX) and 1550 nm for reception (RX). This wavelength configuration enables bidirectional data transmission over a single fiber optic cable, reducing cable count and simplifying installation.
Applications
The media converter is suitable for applications in industrial networks, building cabling, and infrastructures where a connection between an Ethernet switch and a remote device via fiber optic is required. The maximum reach of 20 km makes it particularly suitable for connections between buildings, in factories, or for connecting outdoor stations. The integrated PoE function according to the 802.3af standard enables power supply over the network cable, eliminating the need for a separate power source and making installation more flexible. This is especially advantageous in locations where direct power supply is not available.
Functions and Equipment in Detail
The device features an RJ45 port for connection to an Ethernet network and a singlemode fiber optic port with SC connector. The fiber optic connection is designed for operation with singlemode fiber, enabling high bandwidth and long transmission distances. The WDM technology (Wavelength Division Multiplexing) allows the use of a single fiber optic cable for bidirectional data transmission, with transmission at 1310 nm and reception at 1550 nm. This configuration is typical for cost-effective and high-performance fiber optic connections. The extended diagnostic functionality supports operation through status indicators that monitor the network connection and device function.
Technology Explained Simply
The media converter converts the electrical signals of an Ethernet network via RJ45 into optical signals for transmission over fiber optic and vice versa. The use of singlemode fiber enables high signal quality over long distances, while WDM technology allows the use of a single cable for both transmission directions. Power over Ethernet (PoE) according to 802.3af means the device is powered via the network cable, eliminating the need for a separate power source. This reduces installation costs and simplifies device placement. Optimized latency ensures data transmission occurs as quickly as possible, which is important for time-critical applications.
Compatibility and Accessories
The converter is compatible with Fast Ethernet networks supporting data rates of 10/100 Mbps. Connection is made via an RJ45 port for the copper connection and an SC connector for singlemode fiber optic. The WDM technology with wavelengths of 1310 nm (TX) and 1550 nm (RX) enables bidirectional use of a single fiber optic cable. The PoE function according to 802.3af requires a PoE-capable switch or PoE source to power the device. It is recommended to consider compatibility with singlemode fiber and SC connector when selecting fiber optic cables.
Installation and Mounting
Installation is performed by connecting the RJ45 port to an Ethernet network and the SC port to a singlemode fiber optic cable. Power supply is via PoE, eliminating the need for an additional power source. The devices are designed for use in networks requiring a connection between copper and fiber optic connections. The extended diagnostic functionality enables easy monitoring of operational status. Mounting is typically done in a network enclosure or at a suitable location within the network, ensuring environmental conditions do not affect operation.
Operational Advantages
The use of the KTI media converter KC-351-W3520 enables a flexible and cost-effective connection between copper and fiber optic networks. The WDM technology with singlemode fiber and SC connector ensures high signal quality over a 20 km reach. Optimized latency and extended diagnostic functionality support operation in time-critical and complex networks. The device is therefore particularly suitable for applications requiring a reliable and high-performance connection over long distances.