| General |
| Operating voltage | PoE according to 802.3af |
| Data rate | 10/100 Mbps |
| Fibre optic connector | ST |
| Transmission range | 2 km |
| RJ45 connector | 1x |
| Fibre optic connection | 1x |
| Diagnostic function | extended |
| Latency | optimised |
The KTI media converter KC-351-T is a Fast Ethernet device that enables the transition between a twisted-pair network via RJ45 connection and a fiber optic network via a multimode ST connector. The device is designed for use in networks where a connection between copper and fiber optic sections is required, for example in building cabling or when extending existing networks over longer distances. The converter supports data transfer rates of 10/100 Mbps and is designed for a maximum range of 2 km over multimode fiber optic cable.
Applications
The media converter is suitable for networks that use a combination of copper and fiber optic cables. Typical application scenarios include connecting switches, routers, or end devices over long distances, where copper cables are no longer suitable due to range or interference. The multimode fiber optic cable with ST connector is particularly common in existing infrastructures, making the converter easy to integrate into existing installations. The PoE function enables flexible installation, especially in locations where direct power supply is not available.
Functions and Equipment in Detail
The device features an RJ45 port for connecting to an Ethernet network operating at 10/100 Mbps. The second port is a fiber optic port with ST connector for multimode fibers, supporting a maximum transmission range of 2 km. The extended diagnostic functionality allows monitoring of the operating status, for example through status indicators for the connection and power supply. The optimized latency ensures fast data transmission, which is particularly beneficial for time-critical applications.
Technology Explained Simply
The converter converts the electrical signals from the RJ45 port into optical signals for fiber optic transmission and vice versa. This is done in accordance with the Fast Ethernet standard, with a maximum speed of 100 Mbps. The multimode fiber optic (MM) enables transmission over 2 km, and the ST connector provides a mechanically robust and widely used interface. Power over Ethernet (PoE) according to 802.3af means the device is powered via the network cable, eliminating the need for a separate power supply. This is particularly advantageous when installing in hard-to-reach or power-free areas.
Compatibility and Accessories
The converter is compatible with standard Fast Ethernet networks and multimode fiber optic cables with ST connectors. The PoE function requires a PoE-capable network connection at the RJ45 port, for example a PoE switch.
Mounting and Installation
Installation is carried out by connecting the RJ45 port to a network device such as a switch or router and the ST port to a multimode fiber optic cable. The status indicators facilitate checking the connection and operating status.
Advantages in Operation
Using the converter enables flexible network extension via fiber optic, while the PoE function simplifies installation. The optimized latency ensures smooth data transmission, and the extended diagnostic functionality facilitates network monitoring. The use of multimode fiber optic with ST connector ensures high compatibility with existing infrastructures.