KTI KC-350-W5320

KTI KC-350-W5320 PoE media converter single fiber RJ45 SC SM 20km

KTI KC-350-W5320 PoE media converter single fiber RJ45 SC SM 20km

Lieske Part No. 2117801
Mfg Part No KC-350-W5320
EAN-Code
Manufacturer KTI
Here only 141,36 EUR
168,22 EUR incl. VAT

Further information for KTI KC-350-W5320 PoE media converter single fiber RJ45 SC SM 20km

General
Operating voltagePoE according to IEEE 802.3af
Data rate10/100 Mbps
Plug connectionSC
Transmit wavelength1310 nm
RX wavelength1550 nm
Transmission range20 km
TechnologyWDM
Connection typeRJ45
The KTI media converter KC-350-W5320 is a Fast Ethernet device for transmitting network signals between an RJ45 copper cable and a single-mode fiber optic cable. It thus connects network segments operating on different transmission media and enables the extension of Ethernet network range over fiber optic lines. The device is designed for use in networks with a data rate of 10/100 Mbps and supports transmission over a distance of up to 20 km over single-mode fiber optic cable. The connection is made via an SC connector, with the wavelength for the transmit unit (TX) at 1310 nm and for the receive unit (RX) at 1550 nm. This Wavelength Division Multiplexing (WDM) technology enables bidirectional use of a single fiber optic cable, thereby reducing the number of required fibers.

Applications

The media converter is suitable for use in industrial and commercial networks, particularly where a connection between copper and fiber optic infrastructure is required. Typical applications include connecting network devices in buildings with fiber optic lines that run over long distances, for example between buildings, in factories, or in security and surveillance systems. The support for PoE (Power over Ethernet) according to IEEE 802.3af extends the application range, as the device can be powered via the network cable, simplifying installation and eliminating the need for a separate power supply.

Functions and Equipment in Detail

The device features an RJ45 port for connection to copper cables and a fiber optic port with SC connector for single-mode fiber. The transmission rate is 10/100 Mbps, which is sufficient for many standard applications. The WDM technology with wavelengths 1310 nm (TX) and 1550 nm (RX) enables bidirectional use of a single fiber optic line, thereby improving infrastructure efficiency. The device is designed for a maximum range of 20 km, making it suitable for applications over long distances. Power supply is via PoE according to IEEE 802.3af, allowing the device to be powered through the network cable.

Technology Explained Simply

The media converter converts the electrical signal of an Ethernet copper cable into an optical signal for transmission over fiber optic cable and vice versa. The use of single-mode fiber optic cable enables high bandwidth and low attenuation, allowing transmission over long distances up to 20 km. The WDM technology (Wavelength Division Multiplexing) uses two different wavelengths for data transmission in both directions over a single fiber optic cable, thereby reducing the number of required fibers. Power supply via PoE (Power over Ethernet) according to IEEE 802.3af means the device is powered through the network cable, simplifying installation and eliminating the need for a separate power supply.

Compatibility and Accessories

The media converter is compatible with standard Fast Ethernet networks and supports transmission over single-mode fiber optic cable with SC connector. The use of PoE according to IEEE 802.3af requires a PoE-capable switch or router connection at the RJ45 port. The device is designed for use with standard fiber optic cables that support the specified wavelengths (1310 nm and 1550 nm).

Mounting and Installation

Installation is performed by connecting the RJ45 port to a network device such as a switch or router and the fiber optic port to a fiber optic cable with SC connector. Power supply is via PoE, so no additional power supply is required. Mounting is typically done in a network enclosure or at a suitable location within the network.

Operational Advantages

The use of the media converter enables flexible network extension over fiber optic lines, allowing connection ranges up to 20 km. The WDM technology reduces the number of required fiber optic lines, improving infrastructure efficiency. The optimized latency performance ensures stable and responsive data transmission, which is beneficial for time-critical applications.
This is an offer of:

Lieske Elektronik e.K.

Reutener Str. 10
79279 Vörstetten

https://industry-electronics.com
Tel. 07666/88499-0
Fax. 07666/88499-111

Diesen Artikel finden Sie unter:
industry-electronics.com/artikel/2117801
qrcode für KTI KC-350-W5320 PoE media converter single fiber RJ45 SC SM 20km