| General |
| Ethernet port | 1x 10/100 Mbps |
| Fibre optic port | 1x SM WDM SC |
| Transmission range | 20 km |
| Transmit wavelength | 1310 nm |
| RX wavelength | 1550 nm |
| Current supply | PoE according to IEEE 802.3af |
| Fibre optic connection type | SC |
| Ethernet connection type | RJ45 |
The KTI media converter KC-350-W3520 is a Fast Ethernet device for connecting copper and fibre optic cables. It features an RJ45 port for 10/100 Mbps Ethernet connections and a fibre optic port with Singlemode WDM technology (SC connector), designed for a range of up to 20 km. The device is designed for use in networks where long-distance transmission is required without impairing data rate or signal quality.
Applications
This media converter is suitable for networks requiring a connection between an Ethernet segment using copper cables (e.g. Cat5e or higher) and a fibre optic segment. Typical use cases include connecting network switches, routers or servers over long distances, for example between buildings or in industrial environments. The WDM technology (Wavelength Division Multiplexing) enables the use of a single fibre optic cable for bidirectional data transmission, thereby reducing the number of cables required.
Functions and equipment in detail
The device provides an RJ45 connection for linking to standard Ethernet devices and an SC connector for the fibre optic connection. The fibre optic side is designed for singlemode fibres, enabling transmission over 20 km. The wavelength for the transmit unit (TX) is 1310 nm, while the receive unit (RX) is tuned to 1550 nm. These values are typical for WDM systems, which use two different wavelengths to transmit data in both directions over a single cable. The device is designed for operation in Fast Ethernet networks (10/100 Mbps) and does not support Gigabit transmission.
Technology explained simply
The WDM technology (Wavelength Division Multiplexing) enables simultaneous bidirectional data transmission over a single fibre optic cable by using two different light wavelengths. The transmit unit (TX) operates at 1310 nm, while the receive unit (RX) operates at 1550 nm. This technology reduces the number of cables required and simplifies installation. Power over Ethernet (PoE) according to IEEE 802.3af means the device can be powered via the network cable, eliminating the need for a separate power supply. This is particularly advantageous when installing in hard-to-reach or distributed locations.
Compatibility and accessories
The media converter is compatible with standard Ethernet devices featuring an RJ45 connection, as well as fibre optic infrastructures using singlemode fibres with SC connectors. The use of WDM technology requires that the opposing device is also WDM-capable and supports the corresponding wavelengths. It is important that the wavelengths are correctly assigned on both sides (TX 1310 nm, RX 1550 nm) to ensure bidirectional communication.
Installation and mounting
Installation involves connecting the RJ45 port to an Ethernet device and the SC connector to a singlemode fibre optic cable. Power supply can be via PoE, where the device receives power through the network cable. Alternatively, a separate power supply can be used, provided the device requirements are met. Mounting typically takes place in a network enclosure or at a suitable location within the network. No special tools or additional components are required.
Operational advantages
The use of the KTI KC-350-W3520 enables reliable data transmission over distances up to 20 km without impairing network performance. The PoE function reduces installation costs and simplifies device placement. Optimised latency ensures fast data transmission, which is particularly beneficial in applications requiring high responsiveness. The use of WDM technology reduces the number of cables and simplifies network structure.