| General |
| RJ45 port | 1x 10/100 Mbps |
| Fibre optic port | 1x Fast Ethernet |
| Plug connection | SC |
| Transmission range | 30 km |
| Current supply | PoE according to IEEE 802.3af |
| Latency behaviour | optimised |
The KTI KC-350-SL3 is a Fast Ethernet media converter that enables the connection between a Twisted-Pair network via RJ45 and a fiber optic network via Single-Mode optics. The device features a 10/100 Mbps RJ45 port and a Fast Ethernet fiber optic port with Single-Mode SC connector, designed for a range of up to 30 km. The conversion is performed with optimized latency, which is relevant for applications with high requirements for signal transmission time.
Applications
The media converter is designed for use in networks where a connection between a copper cable network (RJ45) and a fiber optic network is required. Typical application scenarios include extending networks over long distances, for example between buildings or sites, where copper cables are unsuitable due to range limitations or electromagnetic interference. The Single-Mode optics with SC connector are suitable for professional network infrastructures in the fields of telecommunications, industrial networks, or security systems.
Functions and Equipment in Detail
The device supports transmission rates of 10 and 100 Mbps in the Fast Ethernet standard. The RJ45 port allows connection to standard network devices such as switches, routers, or end devices. The fiber optic port is designed for Single-Mode fibers, connected via the SC connector. The maximum range is 30 km, which is sufficient for many industrial and infrastructure applications. Power over Ethernet (PoE) according to IEEE 802.3af reduces the number of required cables and simplifies installation, especially in environments where direct power supply is not available.
Technology Explained Simply
A media converter serves as a bridge between different transmission media. In this case, an electrical signal is received via the RJ45 cable and converted into an optical signal for fiber optic transmission. Single-Mode optics enable high bandwidth and low signal loss over long distances. The SC connector is a standard for fiber optic connections, ensuring a secure and stable connection. The PoE function (Power over Ethernet) allows power supply via the network cable, enabling the device to operate without an additional power connection. The optimized latency ensures that signal delay during conversion remains minimal, which is important for time-critical applications.
Compatibility and Accessories
The converter is compatible with standard Fast Ethernet networks and Single-Mode fiber optic cables with SC connectors. The use of cables with other connectors or modes (e.g., Multi-Mode) is not intended and not supported. The PoE function requires a PoE-capable power supply at the RJ45 port, such as a PoE switch or PoE injector.
Mounting and Installation
Installation is performed by connecting the RJ45 port to a network device and the fiber optic port to a Single-Mode fiber optic cable with SC connector. Power supply is either via PoE or via an external power supply, if not supplied via PoE.
Advantages in Operation
Using the KTI KC-350-SL3 enables a flexible and reliable network connection over long distances. The PoE function reduces installation complexity and the number of required cables. The optimized latency ensures fast signal transmission, which is important for applications with high requirements for response time. The Single-Mode optics with SC connector provide high signal quality and low attenuation, supporting reliable transmission over 30 km.