| General |
| Data rate | 10/100 Mbps |
| Fibre optic connector | SC |
| Transmission range | 60 km |
| Wavelength transmit (TX) | 1310 nm |
| Receiving wavelength (RX) | 1550 nm |
| Technology | WDM |
| RJ45 connector | 1x |
| Fibre optic connection | 1x |
| Network standard | Fast Ethernet |
The KTI media converter KC-300DM-W5360 is a Fast Ethernet network device that enables the connection between a twisted-pair cable (RJ45) and a fiber optic cable. It features a 10/100 Mbps RJ45 port as well as a single-mode fiber optic port with SC connector, designed for a transmission distance of up to 60 km. The device is specifically designed for use in networks where extending the range beyond copper cables is required, for example in industrial facilities, building cabling, or connecting sites over long distances.
Applications
The media converter is suitable for applications requiring stable and reliable data transmission over long distances. It is frequently used in local area networks (LAN) to connect copper connections with fiber optic lines. The use of single-mode fiber (SM) enables high bandwidth and low signal loss, making it particularly suitable for industrial environments, telecommunications networks, or security systems. The maximum range of 60 km also makes it interesting for connections between remote sites, for example between branches or between a main site and an outstation.
Functions and Equipment in Detail
The converter supports data transmission according to the Fast Ethernet standard at a speed of 10/100 Mbps. It features an RJ45 connector for connection to copper cables and an SC connector for the fiber optic side. The fiber optic side is designed for single-mode fibers, ensuring high signal quality over long distances. The WDM technology (Wavelength Division Multiplexing) enables the use of two different wavelengths: 1310 nm for transmission (TX) and 1550 nm for reception (RX). This configuration is typical for bidirectional fiber optic communication over a single fiber core, thereby reducing the number of required fibers.
Technology Explained Simply
WDM technology allows two independent data streams to be transmitted over a single fiber optic cable by using different light wavelengths. In the case of the KC-300DM-W5360, the signal is transmitted in one direction at 1310 nm (transmit) and in the opposite direction at 1550 nm (receive). This is particularly efficient as it reduces the number of required fiber optic cables, thus simplifying installation and maintenance. Optimized latency reduction ensures that data transmission delay remains minimal, which is important for time-critical applications. The extended diagnostic functionality supports operation by providing information about the connection status, for example whether a signal is being received or if an error is present.
Compatibility and Accessories
The media converter is compatible with standard Fast Ethernet networks and can be connected to any device that has an RJ45 connector or an SC connector for single-mode fiber optic. The use of SC connectors is common in many industrial and telecommunication applications. The WDM technology requires a compatible receiver on the other end of the fiber optic cable, which must also support the wavelengths 1310 nm and 1550 nm. The maximum range of 60 km requires that the fiber optic cable used meets the specifications for single-mode transmission.
Installation and Mounting
Installation is carried out by connecting the RJ45 port to a network device, such as a switch, router, or computer, using a standard Ethernet cable. On the fiber optic side, the SC connector is attached to the fiber optic cable. The connection is typically made in a network enclosure or a distribution box. The devices are designed for use in closed racks or industrial environments. No special mounting or additional tools are required, as the connectors are standardized.
Operational Advantages
Using the KTI KC-300DM-W5360 enables efficient network extension over long distances without compromising data transmission quality. The use of single-mode fiber optic ensures high signal stability and low attenuation, increasing reliability. The WDM technology reduces the number of required fiber optic cables, simplifying installation and maintenance. The extended diagnostic functionality facilitates troubleshooting and maintenance, as the operational status can be read directly on the device. Optimized latency ensures smooth communication, especially in applications where time-critical data must be transmitted.