| General |
| Transmission range | 40 km |
| Plug connection | SC |
| Transmit wavelength | 1550 nm |
| RX wavelength | 1310 nm |
| Ethernet speed | 10/100 Mbps |
| Interface | RJ45 |
| Technology | WDM |
| Function | Media converter |
The KTI media converter KC-300DM-W5340 is a Fast Ethernet transmission device that enables the transition between a twisted-pair cable (RJ45) and a singlemode fiber optic cable (SC connector). The device is designed for use in networks requiring long-distance connections, with a maximum range of up to 40 km. It features a 10/100 Mbps RJ45 port and a fiber optic port with singlemode WDM technology, allowing bidirectional data transmission over a single fiber optic cable. The wavelengths are fixed at TX 1550 nm and RX 1310 nm, ensuring efficient use of fiber optic capacity.
Applications
The media converter is suitable for use in industrial and telecommunication networks, particularly in environments where high range and low latency are required. Typical applications include connecting network segments over long distances, such as between buildings, in factories, or when connecting remote sites. The WDM technology enables the use of a single fiber optic cable for bidirectional communication, simplifying cable installation and reducing costs.
Functions and Equipment in Detail
The device offers extended diagnostic functionality, allowing monitoring of the converter's operating status and the quality of the fiber optic connection. These features support network administration in quickly identifying faults. The optimized latency performance ensures fast data transmission, which is particularly beneficial in real-time systems. The RJ45 interface supports standard network speeds of 10 and 100 Mbps, ensuring compatibility with common network devices.
Technology Explained Simply
The media converter acts as a bridge between an electrical network (RJ45) and an optical network (fiber optic). It converts electrical signals into optical signals and vice versa. The use of singlemode fiber optic (SM) enables high bandwidth and low attenuation, allowing transmission over distances of up to 40 km. The WDM technology (Wavelength Division Multiplexing) uses two different wavelengths (1550 nm for transmission, 1310 nm for reception) on the same fiber optic cable to enable bidirectional communication. This reduces the number of required cables and simplifies installation.
Compatibility and Accessories
The converter is compatible with standard Fast Ethernet networks and can be connected to any device equipped with an RJ45 port. The fiber optic side requires a singlemode fiber optic cable with SC connector. The use of WDM technology requires that at the other end of the cable, a compatible receiver with corresponding wavelengths (RX 1550 nm / TX 1310 nm) is present to ensure bidirectional communication.
Mounting and Installation
The media converter can be installed in standard 19-inch rack systems, with mounting via integrated rails. Installation requires connecting the RJ45 port to a network device (e.g., switch, router) and connecting the SC port to a singlemode fiber optic cable.
Operational Advantages
Using the KTI KC-300DM-W5340 enables a cost-effective and reliable network connection over long distances. The WDM technology reduces the number of required fiber optic cables, simplifying installation and reducing costs. The extended diagnostic functionality supports network administration in quickly identifying faults. The optimized latency performance ensures smooth data transmission, especially in applications requiring high responsiveness.