| General |
| Ethernet port | 1x 10/100 Mbps RJ45 |
| Fibre optic port | 1x Singlemode SC |
| Transmit wavelength | 1550 nm |
| RX wavelength | 1310 nm |
| Transmission range | 15-20 km |
| Function | Media converter |
| Data rate | 10/100 Mbps |
The KTI media converter KC-300DM-W5320 is a Fast Ethernet device for converting electrical network signals transmitted over twisted-pair cables (RJ45) into optical signals for fiber optic transmission. It connects networks operating on different transmission media and enables the extension of LAN infrastructures over longer distances. The device is specifically designed for use in industrial and professional networks where stable and reliable data transmission via fiber optic is required.
Applications
This media converter is suitable for applications requiring a connection between an Ethernet switch or router with an RJ45 interface and a fiber optic network. Typical use cases include connecting building networks over long distances, integrating industrial control systems into existing LAN infrastructures, or expanding networks in buildings that lack direct copper connections. The maximum transmission distance is 15 to 20 km, with the exact range depending on the quality of the fiber optic cable and environmental conditions.
Functions and Features in Detail
The device features a 10/100 Mbps RJ45 port for connection to copper cables and a singlemode fiber optic port with SC connector. The fiber optic connection uses WDM technology (Wavelength Division Multiplexing), where transmission directions are implemented using different wavelengths: the transmit side (TX) operates at 1550 nm, and the receive side (RX) at 1310 nm. This configuration enables bidirectional data transmission over a single fiber optic cable. The extended diagnostic functionality supports network administration by displaying status indicators for the ports and the fiber optic connection.
Technology Explained Simply
The media converter converts electrical signals transmitted over an Ethernet cable (RJ45) into optical signals sent over a fiber optic cable. This is achieved through an integrated transceiver that modulates the signals and tunes them to the respective wavelengths (1550 nm and 1310 nm). The use of singlemode fiber (SM) enables high bandwidth and low signal loss over the specified distance of up to 20 km. WDM technology ensures that both transmission directions (transmit and receive) occur over the same fiber optic cable, reducing the number of required cables. The optimized latency performance ensures fast signal transmission, which is particularly beneficial in real-time applications.
Compatibility and Accessories
The converter is compatible with standard Fast Ethernet networks (10/100 Mbps) and can be connected to any RJ45-compatible device such as switches, routers, or PCs. For the fiber optic side, a singlemode fiber optic cable with SC connector is required. The use of cables with other connectors or modes (e.g., multimode) is not intended and not supported. The diagnostic functions enable monitoring of the connection, allowing faults to be quickly identified and localized.
Mounting and Installation
The media converter is designed for mounting in standard 19-inch rack systems. Installation is performed by securing the device in the rack using integrated mounting brackets. The connection cables (RJ45 and SC) are directly connected to the respective ports. The exact power supply specifications are detailed in the technical data. Device configuration is done via LED indicators that display the status of the connections.
Operational Advantages
The use of the KTI KC-300DM-W5320 enables reliable data transmission over long distances, with fiber optic technology offering advantages over copper cables in terms of noise immunity, bandwidth, and security. WDM technology reduces the number of required fiber optic cables, simplifying installation and reducing costs. The extended diagnostic functionality supports network administration in fault detection and resolution. The optimized latency performance ensures smooth data transmission, especially in applications requiring low delay.