| General |
| RJ45 port | 1x 10/100 Mbps |
| Fibre optic port | 1x Fast Ethernet Singlemode WDM SC |
| Transmission range | 60 km |
| Transmit wavelength | 1310 nm |
| RX wavelength | 1550 nm |
| Diagnostic function | extended |
| Latency behaviour | optimised |
The KTI media converter KC-300DM-W3560 is a Fast Ethernet network device that enables the transition between a twisted-pair cable (RJ45) and a singlemode fibre optic cable (SC connector). The device is designed for use in networks requiring connections over long distances, with a maximum range of up to 60 km. It features a 10/100 Mbps RJ45 port and a Fast Ethernet fibre optic port with singlemode WDM technology (Wavelength Division Multiplexing), enabling the use of a single fibre optic cable for bidirectional data transmission. The wavelengths are fixed at TX 1310 nm and RX 1550 nm, ensuring efficient use of fibre optic infrastructure.
Applications
The media converter is suitable for use in industrial and telecommunication networks, particularly in environments requiring high range and low latency. Typical applications include connecting network segments over long distances, for example between buildings, in factories, or when expanding existing LAN infrastructures. The WDM technology allows the use of a single fibre optic cable for both transmission directions, simplifying installation and maintenance and reducing costs for fibre optic infrastructure.
Functions and Equipment in Detail
The device offers extended diagnostic functionality, enabling monitoring of the converter's operating status and the signal quality of the fibre optic cable. These features support rapid fault detection and resolution in the network. The optimised latency performance ensures stable data transmission even under high loads, which is important for time-critical applications. The RJ45 interface supports standard network speeds of 10 and 100 Mbps, ensuring compatibility with common network devices.
Technology Explained Simply
The converter acts as a bridge between an electrical network (RJ45) and an optical network (fibre optic). It converts electrical signals into optical signals and vice versa. The use of singlemode fibre optic (SM) enables high bandwidth and low attenuation, allowing transmission over distances of up to 60 km. The WDM technology (Wavelength Division Multiplexing) uses two different wavelengths (1310 nm and 1550 nm) for bidirectional communication over a single fibre optic cable. This reduces the number of required fibre optic cables and simplifies the network infrastructure.
Compatibility and Accessories
The media converter is compatible with standard Fast Ethernet networks and can be connected to any device equipped with an RJ45 port. The fibre optic side requires a singlemode fibre optic cable with SC connector. The use of WDM technology requires that at the other end of the fibre optic cable, a compatible receiver with corresponding wavelengths (TX 1550 nm / RX 1310 nm) is present to enable bidirectional communication.
Mounting and Installation
Installation is performed by connecting the RJ45 port to a network device (e.g. switch, router or computer) and the SC port to a singlemode fibre optic cable. The connection is made using standard network and fibre optic cables, ensuring correct alignment of wavelengths (TX/RX) at the other end of the connection.
Operational Advantages
Using the KTI KC-300DM-W3560 enables cost-efficient network expansion over long distances without requiring additional fibre optic cables. The WDM technology reduces the number of required cables, simplifying installation and maintenance. The extended diagnostic functionality supports network administration in quickly identifying faults. The optimised latency performance ensures stable data transmission, even under load, which is important for critical applications. Compatibility with standard network technologies ensures easy integration into existing infrastructures.