| General |
| Ethernet standard | Fast Ethernet |
| RJ45 port | 1x 10/100 Mbps |
| Fibre optic port | 1x Singlemode SC |
| Transmission range | 40 km |
| Wavelength transmit (TX) | 1310 nm |
| Receiving wavelength (RX) | 1550 nm |
| Diagnostic function | extended |
| Latency behaviour | optimised |
The KTI media converter KC-300DM-W3540 is a Fast Ethernet network device that enables the connection between a twisted-pair cable (RJ45) and a fiber optic cable. It features a 10/100 Mbps RJ45 port and a singlemode fiber optic port with SC connector, designed for transmission distances of up to 40 km. The device is specifically designed for use in networks where extending the range beyond copper cables is required, for example in industrial facilities, building cabling, or connecting network segments over long distances.
Applications
The media converter is suitable for applications requiring stable, long-distance data transmission over fiber optic cables, while end devices feature standard Ethernet connections (RJ45). Typical use cases include connecting network switches, routers, or servers over long distances, such as between buildings, in factories, or when connecting outdoor stations. The use of singlemode fiber (SM) enables high bandwidth and low signal loss, which is important for critical applications with high requirements for reliability and latency.
Functions and Equipment in Detail
The device supports transmission rates of 10 and 100 Mbps in the Fast Ethernet standard. It is equipped with a WDM method (Wavelength Division Multiplexing), enabling the use of a single fiber optic cable for bidirectional data transmission. The wavelengths are fixed at TX 1310 nm (transmit) and RX 1550 nm (receive), ensuring efficient use of fiber optic infrastructure. The extended diagnostic functionality allows monitoring of operational status, for example through status indicators for connection, signal strength, or error conditions, enabling quick fault detection and resolution.
Technology Explained Simply
The media converter converts electrical signals from the RJ45 port into optical signals for fiber optic transmission and vice versa. The use of singlemode fiber (SM) ensures low attenuation and high bandwidth, enabling transmission over 40 km. The WDM method uses two different wavelengths to transmit data in both directions over a single fiber optic cable, reducing the number of cables required and simplifying installation. The optimized latency performance ensures that signal conversion delay remains minimal, which is advantageous for time-critical applications.
Compatibility and Accessories
The converter is compatible with standard Fast Ethernet networks and can be connected to any device featuring an RJ45 connection. The fiber optic side requires a singlemode fiber optic cable with SC connector.
Mounting and Installation
Installation is performed by connecting the RJ45 port to a network device and the SC port to a singlemode fiber optic cable. Cabling follows Ethernet and fiber optic standards, with attention to correct wavelength polarization (TX 1310 nm, RX 1550 nm).
Advantages in Operation
By combining an RJ45 port with a fiber optic port, the converter enables flexible integration into existing networks. The use of singlemode fiber and WDM technology reduces the required number of cables and increases transmission range. The extended diagnostic functionality supports network administration in quickly identifying faults. The optimized latency performance ensures smooth data transmission, especially in applications where time delays are critical.