| General |
| Number of RJ45 ports | 1 |
| Number of fibre optic ports | 1 |
| Fibre optic connector | SC |
| Transmission range | 60 km |
| Data rate | 10/100 Mbps |
| Ethernet standard | Fast Ethernet |
| Latency behaviour | optimised |
| Diagnostic functions | extended |
The KTI media converter KC-300DM-SL6 is a Fast Ethernet device for converting electrical network signals over twisted-pair cables (RJ45) into optical signals for fibre optic transmission. The device features a 10/100 Mbps RJ45 port and a fibre optic port with Single-Mode (SM) SC connector, designed for a range of up to 60 km. It is used to connect Ethernet networks over long distances, where copper cables are no longer suitable due to signal attenuation. The conversion is bidirectional, enabling data transmission in both directions.
Media converter enables the bridge between different transmission media, here between copper cables and fibre optic cables. This is particularly relevant in industrial or large-scale networks, where connecting remote sites or integrating existing copper infrastructure with modern fibre optic lines is required. The device is typically used in networks requiring high bandwidth and stability over long distances, such as in telecommunications, industrial automation systems, or security networks.
Functions and equipment in detail
The converter offers optimised latency, meaning the delay during signal conversion is minimised. This is especially important in applications requiring real-time communication, such as video transmission, industrial control systems, or network management. Additionally, the device features extended diagnostic functions that monitor operation and help quickly identify fault sources. These functions support network administration in maintenance and troubleshooting, without requiring additional measuring instruments.
Technology explained simply
The converter operates according to the Fast Ethernet standard, with a maximum data rate of 100 Mbps. The RJ45 port enables connection to standard Ethernet networks using Cat5 or higher-grade copper cables. The fibre optic port is designed for Single-Mode fibres, which, due to their low attenuation and high bandwidth, are suitable for transmissions over 60 km. The SC connector is a standardised, robust, and easy-to-handle fibre optic connector, widely used in many industrial and telecommunication applications. Signal conversion is performed by an integrated optoelectronic chip, which converts electrical signals into light pulses and vice versa.
Compatibility and accessories
The device is compatible with standard Fast Ethernet networks and Single-Mode fibre optic cables with SC connectors. It can be integrated into existing networks without requiring special protocol adaptations. The diagnostic functions support compatibility with network management systems that monitor status indicators such as link status, error counters, or signal strength.
Mounting and installation
The media converter is designed for use in standard 19-inch rack systems and can be mounted in a rack. Installation involves connecting the RJ45 port to an Ethernet network and the fibre optic port to a Single-Mode fibre optic cable. Mounting does not require special tools, although the use of fibre optic cables with SC connectors is required.
Advantages in operation
Using the KTI KC-300DM-SL6 enables reliable data transmission over long distances without signal loss. The optimised latency ensures smooth communication in time-critical applications. The extended diagnostic functions reduce maintenance time and simplify network monitoring. The use of Single-Mode fibre optic ensures high bandwidth and low attenuation, guaranteeing performance over a 60 km distance. The device is designed for use in industrial and professional environments, where stability and reliability are critical.