| General |
| RJ45 connector | 1x |
| Fibre optic connection | 1x |
| Fibre optic connector | SC |
| Transmission range | 40 km |
| Data rate | 10/100 Mbps |
| Technology | WDM |
| Transmit wavelength | 1550 nm |
| RX wavelength | 1310 nm |
The KTI media converter KC-300D-W5340 is a Fast Ethernet transition device that enables data exchange between a twisted-pair cable (RJ45) and a fiber optic cable (singlemode, SC connector). It is specifically designed for networks requiring long-distance connections, with a maximum range of up to 40 km. The device supports data rates of 10/100 Mbps and is therefore suitable for classic Ethernet networks that do not require Gigabit transmission. The use of WDM technology (Wavelength Division Multiplexing) enables bidirectional data transmission over a single fiber optic cable, thereby reducing infrastructure costs. The wavelengths are fixed at TX 1550 nm (transmit) and RX 1310 nm (receive), ensuring efficient use of the fiber optic link.
Applications
The media converter is intended for industrial and telecommunication applications where a stable, long-distance connection between network segments is required. Typical use cases include connecting network devices in buildings that are located far apart, or connecting outdoor stations to a central network. Its use in industry, surveillance systems, or telecommunications is particularly beneficial due to its high range and low latency.
Functions and Equipment in Detail
The device features an RJ45 port for connection to a standard Ethernet network, for example, to a switch, router, or computer. The second port is a singlemode fiber optic connection with an SC connector, designed for connection to a fiber optic cable. The WDM technology ensures that data is transmitted in both directions over a single fiber optic cable, reducing the number of required cables. The optimized latency enables fast data transmission, which is advantageous for time-critical applications.
Technology Explained Simply
The technology of the media converter is based on converting electrical signals (via RJ45) into optical signals (via fiber optic) and vice versa. The use of singlemode fiber optic (SM) enables high bandwidth and low signal loss over long distances. The wavelengths 1550 nm and 1310 nm are standardized in optical communication and ensure clear separation of transmit and receive signals. The WDM technology uses these different wavelengths to enable bidirectional communication over a single cable, simplifying installation and maintenance.
Compatibility and Accessories
The converter is compatible with standard Fast Ethernet networks (10/100 Mbps) and singlemode fiber optic cables with SC connectors. The use of WDM technology requires that the opposing end also uses a WDM-capable device to correctly receive the signals.
Mounting and Installation
Installation is performed by connecting the RJ45 port to a network device and the SC port to a fiber optic cable. The connection is made via the physical connectors, with no additional configuration required.
Operational Advantages
The use of the KTI KC-300D-W5340 enables a cost-effective and reliable connection over distances up to 40 km. The use of WDM technology reduces the number of required fiber optic cables, simplifying installation and maintenance. The low latency ensures fast data transmission, which is particularly beneficial in applications with real-time requirements. Compatibility with standard networking technologies facilitates integration into existing infrastructures.