| General |
| RJ45 port | 1x 10/100 Mbps |
| Fibre optic port | 1x Singlemode SC |
| Transmit wavelength | 1310 nm |
| RX wavelength | 1550 nm |
| Transmission range | 40 km |
| Technology | WDM |
| Ethernet standard | Fast Ethernet |
The KTI media converter KC-300D-W3540 is a Fast Ethernet transition device that enables data exchange between a twisted-pair cable (RJ45) and a fiber optic cable. The device features a 10/100 Mbps RJ45 port and a singlemode fiber optic port with SC connector, designed for a transmission distance of up to 40 km. It is specifically designed for network applications requiring a connection between copper-based and optical transmission media, for example in industrial or telecommunication infrastructures.
Applications
The media converter is suitable for use in local area networks (LAN), where extending the range beyond copper cables is required. The fiber optic connection enables stable, interference-free data transmission over long distances, particularly in environments with electromagnetic interference. The use of singlemode fiber (SM) with a wavelength of 1310 nm (transmit) and 1550 nm (receive) is typical for long distances and offers high bandwidth with low attenuation. WDM technology (Wavelength Division Multiplexing) allows bidirectional data transmission over a single fiber optic cable, reducing the number of cables required.
Functions and Equipment in Detail
The device supports Fast Ethernet standard speeds of 10 and 100 Mbps via the RJ45 interface. The fiber optic port is designed for singlemode fibers and uses an SC connector, which is standard in many industrial and telecommunication installations. The wavelength configuration (TX 1310 nm / RX 1550 nm) enables bidirectional communication over a single fiber optic cable, simplifying installation and reducing cable management. The device is designed for a maximum range of 40 km, making it suitable for applications such as connecting sites within a corporate network or in telecommunication.
Technology Explained Simply
The media converter converts electrical signals transmitted over the RJ45 cable into optical signals sent over the fiber optic cable, and vice versa. This is achieved through integrated optoelectronics that modulate and demodulate the signals. The use of singlemode fiber (SM) ensures that the light signal is transmitted over long distances with low attenuation. WDM technology uses two different wavelengths (1310 nm and 1550 nm) for bidirectional transmission, allowing data to flow in both directions over the same cable. The optimized latency performance ensures minimal signal delay, which is important for time-critical applications.
Compatibility and Accessories
The converter is compatible with standard Fast Ethernet networks and can be integrated into existing LAN infrastructures. The use of SC connectors and singlemode fiber requires appropriately equipped cables and receivers. Connections are made via standardized interfaces, so no special adapters or additional devices are required.
Mounting and Installation
Installation is performed by directly connecting the RJ45 port to a network device (e.g. switch, router) and the SC port to a fiber optic cable.
Operational Advantages
Using the media converter allows network range extension up to 40 km, with data integrity ensured by fiber optic transmission. Bidirectional transmission over a single cable reduces the number of cables required and simplifies installation. The optimized latency performance ensures smooth data transmission, especially in applications requiring short response times. Compatibility with standard network interfaces facilitates integration into existing infrastructures.