| General |
| Data rate | 10/100 Mbps |
| Plug connection | SC |
| Transmission range | 60 km |
| Port type | RJ45, fibre optic |
| Ethernet standard | Fast Ethernet |
| Latency behaviour | optimised |
The KTI media converter KC-300D-SL6 is a Fast Ethernet device that enables the connection between a Twisted-Pair network via RJ45 and a fiber optic network via Singlemode SC connector. It is specifically designed for transmission over distances up to 60 km and offers optimized latency performance, making it suitable for applications with high requirements for signal delay. The device supports data rates of 10/100 Mbps in the Ethernet standard and serves as a bridge between different transmission media in network infrastructures.
Applications
The media converter is used in professional networks where a connection between a local network via copper cable (RJ45) and a fiber optic link is required. Typical application scenarios include extending LAN networks over long distances, for example between buildings, sites, or in industrial environments, where fiber optic transmission is preferred due to its bandwidth and immunity to interference. The maximum range of 60 km makes the device particularly suitable for long-distance connections in telecommunications or enterprise networks.
Functions and Equipment in Detail
The device features an RJ45 port, enabling connection to standard Ethernet networks, as well as a fiber optic port in Singlemode SC format. Singlemode technology is optimized for long transmission distances, as it offers lower attenuation and higher bandwidth compared to multimode technology. The converter supports Fast Ethernet standard speeds of 10/100 Mbps, which is sufficient for many enterprise applications. The optimized latency performance ensures that signal delay between the two media is minimized, which is important for real-time applications such as video transmission or network management.
Technology Explained Simply
The media converter converts the electrical signals transmitted over the RJ45 cable into optical signals sent over the fiber optic cable, and vice versa. This is achieved through an integrated transceiver that converts the signal formats without compromising data integrity. The use of singlemode fiber (SM) enables transmission over 60 km, as the optical fiber carries only a single light mode, minimizing signal distortion. The SC connector is a standardized, robust, and easy-to-connect fiber optic connector system widely used in many network applications.
Compatibility and Accessories
The converter is compatible with standard Fast Ethernet networks and fiber optic infrastructures in Singlemode SC format. It can be integrated into existing networks without requiring special protocol adjustments. The use of fiber optic cables with SC connectors is required for the device to function properly.
Mounting and Installation
The media converter is typically installed in a network enclosure or at a suitable location within the network. Connection options are clearly defined: RJ45 port for connection to the local network and SC port for the fiber optic link. Installation does not require special tools, but correct cabling and polarization of the fiber optic cables are important to ensure error-free data transmission. The devices are designed for use in enclosed racks or industrial environments.
Operational Advantages
Using the KTI KC-300D-SL6 enables flexible network expansion over long distances without compromising data transmission performance. The combination of RJ45 and fiber optic connections provides a bridge between different network technologies, allowing existing infrastructures to be used efficiently. The optimized latency performance ensures smooth communication, especially in applications where time-critical data must be transmitted. The use of singlemode fiber ensures high signal quality over the entire range of 60 km.