| General |
| Degree of protection | IP30 |
| Data rate | 10/100 Mbps |
| Transmission range | 30 km |
| Ethernet standard | Fast Ethernet |
| RJ45 port | 1x |
| Fibre optic port | 1x |
| Latency | optimised |
The KTI media converter KC-300D-SL3 is a Fast Ethernet device that enables the connection between a Twisted-Pair network via RJ45 and a fiber optic network via Single-Mode SC connector. It is specifically designed for transmission over distances up to 30 km and offers optimized latency, making it suitable for applications with high requirements for signal delay. The device supports data rates of 10/100 Mbps in the Ethernet standard and serves as a bridge between different network media, allowing existing copper infrastructures to be connected with fiber optic networks.
Media converter enables data transfer between different transmission media, here between copper cable (RJ45) and fiber optic cable (SC Single-Mode). These converters are common in networks where the advantages of fiber optics—such as low attenuation and high reach—should be utilized, while the connection at one end is made via conventional network cables. The KTI KC-300D-SL3 is designed for use in industrial and professional networks where stable and reliable data transmission over long distances is required.
Functions and equipment in detail
The converter features an RJ45 port for connecting to an Ethernet network operating at 10/100 Mbps. This port allows connection to switches, routers, or end devices connected via standard network cables. On the other side, the device provides a fiber optic port with SC connector type, designed for Single-Mode fibers. The maximum reach is 30 km, making it suitable for applications in large office buildings, between sites, or in industrial automation. The optimized latency ensures that signal delay is minimized, which is particularly beneficial for real-time applications.
Technology explained simply
The converter operates in the Fast Ethernet standard, with a maximum data rate of 100 Mbps. Transmission occurs via a Twisted-Pair cable (RJ45) on one side and a Single-Mode fiber optic cable (SC connector) on the other. Single-Mode fibers are suitable for long distances as they transmit only one light mode and thus exhibit lower attenuation. The SC connector is a standard connector in fiber optic technology, ensuring a secure and mechanically stable connection. Latency optimization means that the device minimizes the delay between receiving and transmitting data, which is important for networks with high requirements for response time.
Compatibility and accessories
The KTI KC-300D-SL3 is compatible with standard Ethernet networks operating at 10/100 Mbps and with Single-Mode fiber optic cables using SC connectors. It can be integrated into existing networks that already use RJ45 connections and enables extending the reach via fiber optics. Use requires a suitable Single-Mode fiber optic cable with SC connectors at both ends.
Mounting and installation
Installation is performed by connecting the RJ45 port to a network device such as a switch or router via a standard network cable. The fiber optic port is connected to a Single-Mode fiber optic cable with SC connectors.
Advantages in operation
The use of the KTI KC-300D-SL3 enables the use of fiber optic technology for long distances without having to rebuild the entire network. The optimized latency ensures fast data transmission, which is particularly advantageous in networks with time-critical applications. The connection between copper and fiber optic networks is stable and reliable, maintaining network performance. Compatibility with standard Ethernet technologies facilitates integration into existing infrastructures.