Alarm system
with connection possibility for two additional sensors and relay output for connecting external alarm devices (eg flash signal lamp). gas and anesthetic gas monitor model AMS - COMBINATION ALARM



The AMS ESTATE ALERT system is an autonomous alarm system with built-in sensor and audible alarm.
It is equipped with a very special sensor, which permits the system at the same time both as a gas detector
use as well as anesthetic gas monitoring system.
Furthermore, the system offers the possibility - depending on the size of the vehicle - to connect two additional sensors.
The additional sensors are in the execution for the detection of gas and anesthetic gas as well as in the design for the detection of carbon monoxide available.
Connecting the addition of sensors to the sensor outputs 2 and 3 to the central unit is possible in any combination.
For connecting external alarm devices (eg flash signal lamp) is a relay output.

The AMS ESTATE ALERT feels anesthetic gas on even at low concentrations, ie before they develop their drowsiness and
can turn off the ability to react to the occupants.When the gases butane / propane / methane is far below the threshold of the lower
flammable limit of the gas, ie the point at which an explosive mixture. The system is characterized by a comparatively
from very low power consumption.
The sensitivity threshold of the sensor is fully automatic.

After 12 volt direct current (DC).
Use: caravan, campers, truck cabs
H / W / D 90x115x30 mm