| General |
| Pipe Ø | 25 mm |
| Working temperature | -40 to 80 °C |
| Hue | Light grey |
| RAL | 7035 similar |
| Material | Polyethylene (PE) |
| Utilization | Electrical installation conduits according to DIN EN 60423 / IEC 423 |
| Property | halogen-free |
The end cap 1590M25 from Kleinhuis is an accessory for electrical installation conduits with an outer diameter of 25 mm. It is slipped onto the conduit and primarily serves to protect cables during cable exit or cable pulling. The cap is made of polyethylene (PE) and is halogen-free, making it suitable for use in electrical installations. It features a short internal flange that protects cables from mechanical damage when entering or exiting the conduit. The colour is light grey, corresponding to RAL 7035 (similar), and the cap is intended for use in personal hazard zones.
Applications
The end cap is specifically designed for electrical installation conduits in accordance with DIN EN 60423 / IEC 423, but can also be used on other conduits with the same outer diameter of 25 mm. It is commonly used in electrical installations where cables are routed through conduits and must be protected at the ends to prevent damage from friction or mechanical stress. The cap is particularly used in areas where personnel work near or are present along cable routes to enhance safety.
Functions and Features in Detail
The cap has an internal flange that extends into the conduit and covers the cables during entry and exit. This prevents cable edges from being scraped or torn at the conduit ends. The halogen-free material composition reduces the formation of toxic fumes in the event of fire, increasing safety in electrical installations. The cap is lightweight and easy to install, as it simply slides onto the conduit without requiring additional tools or fastening devices.
Technology Explained Simply
The material polyethylene (PE) is a thermoplastic polymer known for its chemical resistance, flexibility, and high insulation properties. The cap is designed for an operating temperature range of -40°C to 80°C, making it suitable for a wide range of indoor and outdoor applications. The length of the cap is approximately 27.5 mm, ensuring sufficient depth into the conduit to protect the cables. The light grey colour (RAL 7035) is a standard colour in electrical installations and ensures visual harmony with other installation components.
Compatibility and Accessories
The end cap is compatible with electrical installation conduits according to DIN EN 60423 / IEC 423 with an outer diameter of 25 mm. Suitable accessories include, for example, the Fränkische E-Ku-E 25 plastic end cap grey 25995025, the BFM-ET M25 conduit end cap RAL7035 LGR 2210-20-0019, and the 129 TB M25 conduit end cap split metric light grey polyethylene PE 2047839. These items can be used as alternatives or supplements depending on requirements and installation conditions.
Installation and Mounting
Installation is performed by simply sliding the end cap onto the conduit end. No additional tools or fastening devices are required. The cap remains in place due to friction fit on the conduit. Installation typically occurs at the end of the conduit before cables are pulled in, to protect the cables during installation.
Operational Advantages
The end cap provides simple yet effective protection for cables during entry and exit from electrical installation conduits. The halogen-free design increases safety in the event of fire. The polyethylene material ensures high chemical resistance and insulation properties. The cap is easy to install and requires no additional fastening devices, reducing installation time. The operating temperature range of -40°C to 80°C makes it suitable for a wide range of operating conditions.