Kleinhuis 1128.G, EAN: 4011126003178

Kleinhuis 1128.G Terminal Block 3p white

Installation > Fixing hardware > Screw

Kleinhuis 1128.G Terminal Block 3p white

Lieske Part No. 135773
Mfg Part No 1128.G
EAN-Code 4011126003178
Manufacturer Kleinhuis
Here only 4,34 EUR
5,16 EUR incl. VAT

Further information for Kleinhuis 1128.G Terminal Block 3p white

General
Operating voltage450 V
Clamping range1,0 - 4,0 mm²
Connection options solid, rigid3 x 1,0 mm², 2 x 1,5 mm², 1 x 2,5 mm², 1 x 4,0 mm²
Flexible connection options2 x 1,0 mm², 2 x 1,5 mm², 1 x 2,5 mm², 1 x 4,0 mm²
Poles3
Material of insulating partPorcelain, glazed
Material of terminal screwBrass
Material of terminal screwsgalvanised steel
Max. ambient temperature200 °C
HueWhite
NormDIN EN 60998
Halogen freeYes
The terminal block 1128.G from Kleinhuis is a three-pole, porcelain-insulated terminal block for use in electrical installations. It complies with the standard DIN EN 60998 and is designed for mounting on substructures, requiring a fixed-position installation. The terminal block is halogen-free and suitable for connecting conductors with a cross-section of 1.0 to 4.0 mm², both for rigid and flexible conductors. Dimensions are approximately 16.5 mm height, 17 mm width, and 31.5 mm length. The colour is white, providing good visibility in installations.

Terminal block

The terminal block features three poles and is designed for various combinations of conductor cross-sections. For rigid, single-core wiring, for example, three conductors of 1.0 mm², two of 1.5 mm², one of 2.5 mm², or one of 4.0 mm² can be connected. For flexible conductors, the same combinations are possible, with the number of connected conductors varying according to cross-section. The terminal block is thus flexibly applicable in various installation scenarios, such as in distribution boxes or enclosures.

Functions and equipment in detail

The insulation consists of glazed porcelain, offering high mechanical strength and electrical insulation. The terminal bolts are made of brass, ensuring good conductivity and corrosion resistance. The terminal screws are made of galvanised steel, providing sufficient strength and protection against environmental influences. The mounting holes allow for secure installation on suitable substrates.

Technology explained simply

The terminal block is designed for a maximum ambient temperature of 200 °C, making it suitable for applications with increased thermal load. The rated voltage is 450 V, enabling use in low-voltage installations up to 450 V. The halogen-free design reduces the formation of toxic fumes in case of fire, increasing safety. The glazed porcelain surface provides additional protection against moisture and contamination.

Compatibility and accessories

The terminal block is designed for use with conductors in the cross-section range of 1.0 to 4.0 mm², allowing both rigid and flexible conductors to be connected. The combinations of connection options are designed to meet the requirements of typical electrical installations.

Mounting and installation

Mounting is done via the integrated mounting holes, with the terminal block requiring fixed-position installation to ensure a secure and stable connection. The screws are dimensioned to allow a secure connection without overloading. The terminal block is intended for use in enclosed switchgear or distributors, where mechanical stability and electrical safety are required.

Advantages in operation

The combination of porcelain insulation, brass terminal bolts, and galvanised screws ensures high reliability and durability. The halogen-free design increases safety in case of fire. The clear colour coding and defined connection options facilitate installation and maintenance. The terminal block is suitable for use in industrial and commercial installations as well as in residential buildings, where a secure and long-lasting connection is required.

Protection rating

The terminal block is not designed to be waterproof or dust-tight, as it is intended for use in enclosed switchgear. Installation takes place in protected environments, avoiding direct exposure to moisture or dust.

Rated voltage

The rated voltage of 450 V enables use in typical low-voltage installations. The terminal block is not designed for higher voltages, as confirmed by the standard DIN EN 60998.

Terminal range

The terminal range covers cross-sections from 1.0 to 4.0 mm², allowing both rigid and flexible conductors to be connected. The exact assignment of connection options is detailed in the description.

Materials

The insulation consists of glazed porcelain, the terminal bolts are made of brass, and the screws are made of galvanised steel. This material combination ensures high electrical conductivity, mechanical strength, and corrosion resistance.

The terminal block is designed for use in electrical installations where a secure and durable connection is required. Mounting is done via mounting holes, with fixed-position installation necessary. The combination of porcelain, brass, and galvanised steel ensures reliability and longevity. The halogen-free design increases safety in case of fire. The terminal block is suitable for use in enclosed switchgear, where direct environmental influences are excluded.
This is an offer of:

Lieske Elektronik e.K.

Reutener Str. 10
79279 Vörstetten

https://industry-electronics.com
Tel. 07666/88499-0
Fax. 07666/88499-111

Diesen Artikel finden Sie unter:
industry-electronics.com/artikel/135773
qrcode für Kleinhuis 1128.G Terminal Block 3p white