Klauke K05, EAN: 4012078000079

Klauke K05 Crimping Tool 6–50 mm²

Tools > Pliers > Crimping pliers

Klauke K05 Crimping Tool 6–50 mm²

Lieske Part No. 244585
Mfg Part No K05
EAN-Code 4012078000079
Manufacturer Klauke
Here only 315,78 EUR
375,78 EUR incl. VAT

Further information for Klauke K05 Crimping Tool 6–50 mm²

General
Cross-sectional area6-50 mm²
DriveMechanical
Profile discsRotatable
Markingpermanently attached to profile plates
The Klauke crimping tool type K05 is a mechanical tool for crimping insulated cable connectors with a cross-section of 6 to 50 mm². It is specifically designed for use in electrical and installation trades, where precise and force-saving crimping of cable connectors is required. The tool features a mechanical drive, which, due to its construction, is low-maintenance and efficient in operation. The crimping tool enables exact assignment of the cable cross-section through permanent markings on the profile discs, which are directly attached to the tool.

Crimping tool
The crimping tool K05 is a hand-operated tool that does not require electrical or pneumatic drives. The mechanical drive ensures that the required crimping force is generated by the operator's hand force, with the construction optimizing force transmission. This results in reduced muscular effort and fatigue-free work, especially during frequent use. The crimping tool is designed for use with insulated cable connectors, which are used in electrical installations for secure connection of conductors.

Rotatable profile discs
A central feature of the crimping tool K05 is the rotatable profile discs. These allow flexible adaptation to various cable cross-sections within the range of 6 to 50 mm². The profile discs are designed to rotate easily, enabling the operator to activate the required crimping profile. The permanent marking on the discs ensures that the operator can quickly and safely select the correct cross-section without requiring additional aids or instructions.

Exact cross-section assignment
The exact assignment of the cable cross-section is achieved through the permanent marking on the profile discs. These markings are directly applied to the discs and indicate the permissible cross-sections that can be processed with the respective profile. This prevents incorrect crimping, thereby increasing the safety and reliability of the connection. The markings are designed to remain clearly legible even after prolonged use, supporting long-term use of the tool.

Applications
The crimping tool K05 is used in the field of electrical installation, particularly for crimping insulated cable connectors in residential and commercial buildings. It is suitable for tasks requiring high precision and repeatability in crimping. The tool is designed for use in craft practice, where its mechanical construction and simple operation allow it to be quickly integrated into the workflow.

Compatibility and accessories
The crimping tool K05 is designed for use with insulated cable connectors in the cross-section range of 6 to 50 mm². Crimping is performed via the rotatable profile discs, which are optimized for this cross-section range.

Mounting and installation
The crimping tool K05 requires no mounting or installation. It is designed as a hand-held tool and can be used immediately after unpacking. Operation involves manual actuation of the drive mechanism, with the rotatable profile discs needing to be set to the correct cross-section before crimping. Handling is simple and requires no special preparation or tools.

Operational advantages
The mechanical drive of the crimping tool K05 ensures force-saving and low-maintenance use. The rotatable profile discs with permanent markings enable quick and secure selection of the correct cross-section, increasing work speed. Crimping is precise and reproducible, ensuring the quality of cable connections. The tool is robust and designed for daily use in craft applications.
This is an offer of:

Lieske Elektronik e.K.

Reutener Str. 10
79279 Vörstetten

https://industry-electronics.com
Tel. 07666/88499-0
Fax. 07666/88499-111

Diesen Artikel finden Sie unter:
industry-electronics.com/artikel/244585
qrcode für Klauke K05 Crimping Tool 6–50 mm²