| General |
| Norm | DIN 46235 |
| Conductor cross section | 70 mm² |
| Material | Cu |
| Material standard | EN 13600 |
| Surface treatment | Galvanic tinned |
| Code digit | for tool assignment |
| Press markings | for correct crimping |
| Material condition | annealed |
| Application | for round conductors VDE 0295 class 1, 2, 5, 6 and round-compressed multi-strand sector conductors |
The Klauke cable lug 107R8 is a crimp cable lug for use in electrical installations, particularly for round conductors and round-pressed multi-strand sector conductors. It complies with the standard DIN 46235 and is designed for conductor cross-sections of 70 mm². The lug is made of copper (Cu) specified according to EN 13600 and is galvanically tinned to prevent corrosion. The tinning provides improved resistance to environmental influences, especially in damp or aggressive environments. The precise end finishing facilitates cable entry and ensures a secure and clean installation.
Applications
The cable lug 107R8 is designed for use in electrical systems where a reliable and durable connection between conductors and connection points is required. It is particularly suitable for round conductors according to VDE 0295 Class 1, 2, 5, and 6, as well as for round-pressed multi-strand sector conductors. These conductor types are commonly found in industrial and commercial electrical installations, as well as in building electrics. Use in systems with high mechanical or thermal loads is possible due to the material quality and crimping strength.
Functions and Equipment in Detail
The lug features an identification number that enables unambiguous assignment to the required tool. This reduces errors during installation and ensures that the lug is processed with the correct crimping tool. The crimp marks on the lug serve as a visual guide to ensure correct crimping. Crimping is performed using a crimping tool that compresses the lug onto the conductor, creating a firm and conductive connection. The use of annealed material ensures optimal crimping properties and uniform material deformation, increasing the reliability of the connection.
Technology Explained Simply
The galvanic tinning protects the copper material from oxidation and corrosion, extending the service life of the connection. The tinning is evenly applied to the surface and ensures good electrical conductivity. The material Cu according to EN 13600 is high-quality copper specified for electrical contacts and connections. The precise end finishing of the lug allows for easy and clean cable insertion, reducing installation time and minimizing the risk of conductor damage.
Compatibility and Accessories
The cable lug is suitable for round conductors according to VDE 0295 Class 1, 2, 5, and 6, as well as for round-pressed multi-strand sector conductors. Use requires a crimping tool compatible with the lug’s identification number. The lug is to be used exclusively in conjunction with an appropriate crimping tool.
Installation and Mounting
Installation is performed by crimping the lug with a tool matching its identification number. The crimp marks serve as a reference to ensure the lug is fully and correctly crimped. The precise end finishing facilitates cable insertion into the lug. After crimping, a firm, conductive, and durable connection between conductor and connection point is guaranteed. Installation should be carried out in accordance with DIN 46235 and the manufacturer’s instructions for the crimping tool.
Operational Advantages
The cable lug 107R8 provides a reliable and durable connection that remains stable even under load. The tinning protects against corrosion and extends service life. The identification number and crimp marks ensure error-free installation. The use of annealed material and precise end finishing increase installation efficiency and connection quality. Compliance with DIN 46235 ensures compatibility with other components and adherence to safety standards.