| General |
| Norm | DIN 46235 |
| Conductor cross section | 35 mm² |
| Inner diameter | M8 |
| Material | Cu |
| Material standard | EN 13600 |
| Surface treatment | Galvanic tinned |
| Code digit | for tool assignment |
| Press markings | for correct crimping |
| Material condition | Annealed material |
| End processing | precise |
| Application | for round conductors VDE 0295 class 1, 2, 5, 6 and round-compressed multi-strand sector conductors |
The crimp cable lug 105R8 from Klauke is a cable lug designed for use in electrical installations, specifically intended for connecting round conductors and round-compressed multi-strand sector conductors. It complies with the standard DIN 46235 and is designed for cross-sections of 35 mm², with an internal diameter of M8. The lug is made of copper (Cu) specified according to EN 13600 and is galvanically tinned to prevent corrosion. The tinning ensures improved oxidation resistance and secure electrical conductivity over the service life. The material properties are optimized by annealed material, which ensures uniform crimping and high mechanical strength.
Applications
The cable lug 105R8 is designed for use in electrical systems where a secure and durable connection between conductors and connection points is required. It is particularly suitable for round conductors according to VDE 0295 Class 1, 2, 5, and 6, as well as round-compressed multi-strand sector conductors. These conductor types are typically found in industrial electrical installations, building electrics, and systems with high mechanical loads. Use in these areas requires high reliability and mechanical stability, which is ensured by the specific design of the lug.
Functions and Equipment in Detail
The lug features an identification number that enables unambiguous assignment to the required crimping tool. This reduces the risk of errors during installation and ensures correct crimping. The crimp marks at the lug opening serve as visual references to ensure correct positioning of the tool. The precise end finishing facilitates cable insertion into the lug and prevents damage to the conductor. The galvanic tinning protects the copper material from corrosion and oxidation, increasing the electrical conductivity and service life of the lug.
Technology Explained Simply
The use of annealed copper material ensures optimal crimping and material properties. Annealed material has higher malleability, allowing for uniform and dense crimping of the conductor. Crimping is performed using a crimping tool matched to the lug’s identification number. The crimp marks assist in correctly positioning the tool to ensure a secure and durable connection. The galvanic tinning forms a thin protective layer on the copper surface, shielding it from moisture and oxidizing influences.
Compatibility and Accessories
The cable lug is suitable for round conductors according to VDE 0295 Class 1, 2, 5, and 6, as well as round-compressed multi-strand sector conductors. Use requires a crimping tool matched to the lug’s identification number.
Installation and Mounting
Installation is performed by crimping the cable lug with a suitable tool matched to the lug’s identification number. The crimp marks at the lug opening serve as references for correct tool positioning. The precise end finishing facilitates cable insertion into the lug. Crimping must be performed so that the conductor is fully seated in the lug and a secure electrical connection is established.
Operational Advantages
The cable lug 105R8 offers high mechanical strength and a secure electrical connection. The galvanic tinning protects against corrosion and oxidation, increasing the service life of the lug. The identification number and crimp marks ensure easy and error-free installation. The use of annealed copper material ensures uniform crimping and high reliability of the connection.