Further information for Kerpenwerk KD7D66D4Y010000 cable Cat.7 4x2xAWG23/1 PiMF Dca yellow
General
Shielding type
S/FTP
Number of pairs
4
Conductor material
solid copper
Shielding
Overall shield made of copper wire braid and individual shields for the wire pairs
Standards
ISO/IEC 11801, EN 50173 (3rd edition)
Application classes
D to F
Supported technologies
PoE, PoE+, 4PPoE, >10 GbE according to IEEE 802.3an
Application range
Interior and exterior area
UV resistance
The Kerpenwerk data cable type KD7D66D4Y010000 is a symmetrical installation cable for structured building cabling. It features 4 twisted pair elements, with conductors made of solid copper. The shielding consists of an overall copper braid shield as well as individual shields for each pair, ensuring high electromagnetic shielding and thus optimal signal quality. The cable is designed for use in networks according to the standards ISO/IEC 11801 and EN 50173 (3rd edition) and is suitable for applications in classes D to F.
Applications
The cable is designed for multimedia applications requiring high data rates, including video transmission, data communication, and voice transmission. It supports data rates exceeding 10 Gbit/s according to IEEE 802.3an, making it suitable for modern networks. It can also be used outdoors, as the cable is UV-resistant and thus protected against UV radiation.
Functions and equipment in detail
The 4 twisted pair elements ensure stable and interference-free data transmission. The solid copper conductors offer high conductivity and are designed for reliable signal transmission. The combination of overall shield and individual shields reduces electromagnetic interference and crosstalk, which is particularly important at high frequencies. The UV resistance enables outdoor use, for example in outdoor installations or industrial facilities with direct sunlight exposure.
Technology explained simply
The cable is constructed as S/FTP (Screened/Foiled Twisted Pair), meaning that both the entire cable and each individual pair are shielded. This ensures high shielding effectiveness against external interference and minimal crosstalk between pairs. The use of solid copper ensures consistent conductivity over the entire length. The standards ISO/IEC 11801 and EN 50173 (3rd edition) define requirements for structured cabling, which this cable meets.
Compatibility and accessories
The cable is suitable for applications in classes D to F, making it usable for a wide range of network applications. It supports PoE (Power over Ethernet), PoE+, and 4PPoE, making it suitable for powering end devices via the network cable. Use in combination with other components of structured cabling, such as patch cables, sockets, or patch panels, is possible, provided these components meet the corresponding standards.
Installation and mounting
The cable is intended for installation in structured building cabling. It can be installed indoors and outdoors, with UV resistance enabling outdoor use. Installation should follow the guidelines of the standards ISO/IEC 11801 and EN 50173 (3rd edition). Installation does not require special tools, but adherence to bend radii and maximum installation lengths is recommended to ensure signal quality.
Advantages in operation
The high shielding and use of solid copper ensure reliable and interference-free data transmission. Support for PoE technologies enables power supply of end devices via the network cable, simplifying installation. UV resistance extends the application range to outdoor environments without impairing performance. The cable is therefore suitable for demanding applications in office buildings, industrial facilities, or outdoor environments.