Further information for KBE 820400015060QUSW H1Z2Z2-K 4,0 sw solar cable black
General
Cable type
H1Z2Z2-K
Cross section
4,0 mm²
Colour
Black
Nominal voltage
1,5/1,5 kV
Stranded wire type
tinned Cu stranded wire, fine-stranded
Stranded wire class
IEC 60228 class 5
Insulation
chemically cross-linked, halogen-free
Sheath
chemically cross-linked, halogen-free
Outer diameter
5,50 mm
Tolerance outer diameter
±0,20 mm
Norm
62930 IEC 131
UV resistance
Acid and alkali resistance
Suitable for underground installation
The KBE solar cable type H1Z2Z2-K 4,0 sw is a heat-resistant silicone cable, specifically designed for use in photovoltaic systems. It is a 100m reel cable with a cross-section of 4 mm², black sheath, suitable for connecting solar cells, inverters, and other components in the DC range. The cable complies with standard 62930 IEC 131 and is marked with a meter marking to enable accurate length measurement during installation.
Applications
This cable is designed for outdoor use and is suitable for underground installation as well as for installations in environments with high mechanical stress. It is resistant to UV radiation, acids, and alkalis, making it suitable for industrial and agricultural applications as well as solar installations in various climate zones. The high water resistance ensures reliable operation even under moisture exposure.
Functions and Equipment in Detail
The cable features a Cu stranded conductor, tinned and fine-stranded according to IEC 60228 class 5. This construction ensures high flexibility and mechanical strength, which is particularly advantageous for frequent bending stresses or installations in confined spaces. The insulation and sheath are chemically cross-linked, increasing thermal and mechanical stability. Additionally, the cable is halogen-free, meaning lower smoke and gas emission in case of fire.
Technology Explained Simply
The rated voltage is Uo/U DC 1.5/1.5 kV, making the cable suitable for use in high-voltage DC systems, as commonly found in modern photovoltaic installations. The outer diameter is 5.50 mm (±0.20 mm), providing a balanced combination of flexibility and mechanical stability. The chemical cross-linking of insulation and sheath increases heat resistance and extends service life under load. The halogen-free composition reduces fire hazard and toxicity in case of fire.
Compatibility and Accessories
The cable is designed for use in photovoltaic systems and can be connected with standard connectors, cable lugs, and other PV installation components. It is suitable for underground installation and can be installed in cable ducts, on trays, or outdoors. The meter marking facilitates planning and installation, as the length is always readable during laying.
Installation and Mounting
Installation is typically performed using cable cutters, cable lugs, and connection techniques approved for PV systems. The cable can be processed with standard tools, although the fine-stranded conductor requires careful handling to avoid breaks or wear. Underground installation may require additional protective measures such as cable protection conduits, depending on local regulations.
Advantages in Operation
The high resistance to UV radiation, acids, alkalis, and moisture ensures long service life and low maintenance. The chemically cross-linked insulation and halogen-free sheath increase safety and environmental compatibility. The meter marking supports planning and reduces errors during installation. Manufacturing in Germany ensures high quality standards and reliability.