Further information for KBE 820400015060QURT Solar cable H1Z2Z2-K 4,0 rt red
General
Cable type
H1Z2Z2-K
Cross section
4 mm²
Colour
Red
Nominal voltage
1,5/1,5 kV
Conductor material
Tinned Cu stranded wire
Conductor class
5
Insulation
chemically cross-linked, halogen-free
Sheath
chemically cross-linked, halogen-free
Outer diameter
5,50 mm
UV resistance
Acid and alkali resistance
Suitable for underground installation
Meter marking
The product is a solar cable of type designation H1Z2Z2-K 4.0 rt, manufactured by KBE. It is a 100-meter-long, red-colored cable with a cross-section of 4 mm², specifically designed for use in photovoltaic systems. The cable is supplied as a coil and features a meter marking, enabling precise length measurement during installation. The construction complies with standards 62930 and IEC 131, ensuring suitability for use in solar installations.
Applications
This solar cable is intended for use in photovoltaic systems, particularly for connecting solar cells, inverters, and other components in the direct current circuit. Due to its chemically cross-linked insulation and sheathing, it is suitable for underground installation, offering high water resistance, UV resistance, and resistance to acids and alkalis. These properties also make it suitable for outdoor use and long-term installations under harsh environmental conditions.
Functions and Features in Detail
The cable features a Cu conductor, tinned and fine-stranded, in accordance with IEC 60228 class 5. This construction ensures high flexibility and mechanical robustness, which is advantageous during frequent bending and installation operations. The insulation and sheathing are chemically cross-linked, providing enhanced thermal and mechanical stability, as well as improved aging resistance. The materials are halogen-free, meaning lower toxicity and smoke development in case of fire.
Technology Explained Simply
The rated voltage is Uo/U DC 1.5/1.5 kV, meaning the cable is designed for direct current applications with a maximum voltage of 1.5 kV per conductor and 1.5 kV between conductors. This is sufficient for most photovoltaic systems, especially in larger installations. The outer diameter is 5.50 mm ± 0.20 mm, enabling a compact design without compromising mechanical strength. The chemical cross-linking of the insulation and sheathing ensures high resistance to environmental influences, particularly moisture, UV radiation, and chemical substances.
The meter marking on the cable facilitates accurate length measurement during installation, helping to avoid material waste and incorrect installations. The red color serves as a visual identifier, commonly used in the photovoltaic industry to distinguish DC circuit wiring from other cables.
Compatibility and Accessories
The cable is designed for use in photovoltaic systems and is compatible with standard connectors and cable lugs designed for a 4 mm² cross-section. It is suitable for underground and outdoor use, with the chemically cross-linked insulation and sheathing providing the necessary resistance to moisture, UV radiation, and chemical influences. The halogen-free composition meets safety requirements for critical installations and reduces fire hazard.
Installation and Mounting
The cable is supplied as a 100m coil, enabling easy storage and transportation. The meter marking facilitates precise length measurement during installation. The fine-stranded, tinned Cu conductor allows flexible routing, even in tight bends. Installation typically involves connecting with suitable cable lugs or plug connectors designed for a 4 mm² cross-section. Underground installation is possible, with the high water resistance and chemical resistance of the sheathing ensuring long-term stability.
Operational Advantages
The cable offers high mechanical and thermal stability, enabling long service life and low maintenance frequency. The halogen-free design reduces fire hazard and toxicity in case of fire. UV and chemical resistance ensure high reliability under harsh environmental conditions. The meter marking supports precise and efficient installation, minimizing material waste. Manufacturing in Germany ensures high quality standards and reliability.