Further information for KBE 730400015060QUSW H1Z2Z2-K 4,0 sw solar cable black
General
Cable type
H1Z2Z2-K
Cross section
4,0 mm²
Colour
Black
Outer diameter
5,50 mm
Tolerance outer diameter
±0,20 mm
Nominal voltage
1,5/1,5 kV
Voltage type
DC
Conductor material
Cu
Conductor coating
Tinned
Conductor structure
fine-stranded
Conductor class
5
Insulation
chemically cross-linked
Sheath
chemically cross-linked
Approval
TÜV
Norm
62930 IEC 131
Packaging
Drum
Halogen free
Suitable for underground installation
UV resistant
Acid- and alkali-resistant
Meter marking
The KBE solar cable H1Z2Z2-K 4.0 sw is a heat-resistant silicone cable, specifically designed for use in photovoltaic systems. With a cross-section of 4 mm² and a length of 500 m on a reel, it provides reliable power transmission in solar installations. The cable is black and features a meter marking, which facilitates precise length measurement during installation. The construction complies with standard 62930 IEC 131, confirming its suitability for use in solar systems. The cable is manufactured in Germany and is therefore Made in Germany.
Applications
This cable is intended for use in photovoltaic systems, particularly in systems requiring high mechanical and chemical resistance. It is suitable for underground installation due to its high water resistance. The UV resistance makes it suitable for outdoor applications where it is exposed to long-term sunlight. The acid and alkali resistance extends its application range to environments with aggressive chemicals, for example in industrial plants or in special solar system configurations.
Functions and Equipment in Detail
The cable features a Cu conductor, tinned and fine-stranded, according to IEC 60228 class 5. This construction ensures high flexibility and mechanical strength, which is particularly advantageous under frequent bending stress or during installation in confined spaces. The insulation and sheath are chemically cross-linked, increasing thermal and mechanical stability. The materials are halogen-free, meaning lower toxicity and smoke development in case of fire. The high water resistance enables safe underground installation without impairing electrical properties.
Technology Explained Simply
The designation H1Z2Z2-K describes the cable type according to IEC 60502 standard. Here, H1 refers to the cable type (highly flexible), Z2Z2 to the insulation and sheath made of chemically cross-linked silicone, and K to the copper conductor. The rated voltage Uo/U DC 1.5/1.5 kV indicates that the cable is designed for direct current applications up to 1.5 kV, which is typical for photovoltaic systems. The outer diameter is 5.50 mm with a tolerance of ±0.20 mm, enabling precise installation and mounting. The chemical cross-linking of insulation and sheath ensures high thermal resistance and longer service life under load.
Compatibility and Accessories
The cable is designed for use in photovoltaic systems and can be connected with standard connectors, cable lugs, and other components suitable for silicone cables. The TÜV approval confirms compliance with applicable safety and quality requirements. It is suitable for underground installation and outdoor use, with UV and chemical resistance opening additional application possibilities. Use in combination with other photovoltaic components, such as inverters or modules, is standard.
Installation and Mounting
Installation typically takes place from a 500-m reel, with the meter marking facilitating precise length measurement during laying. The high flexibility of the fine-stranded Cu conductor allows easy bending and installation. The cable can be laid directly in the ground, with water resistance and chemical resistance against soil chemicals ensuring long-term stability. Mounting does not require special tools, although the regulations for solar cable installation should be observed, particularly regarding minimum bending radius.
Advantages in Operation
The high thermal resistance of the chemically cross-linked silicone enables reliable operation even at high temperatures, as occur in solar systems. The UV and chemical resistance ensures long service life and low maintenance. The halogen-free composition reduces fire hazard and toxicity in case of fire. The suitability for underground installation and high water resistance extend application possibilities and reduce the need for additional protective measures. The TÜV approval and German manufacturing underscore the product’s quality and reliability.