KBE 730400015060QURT

KBE 730400015060QURT H1Z2Z2-K 4,0 rt Solar cable red

Cables > Heat resistant cable / Silicone > Heat resistant cable / Silicone

KBE 730400015060QURT H1Z2Z2-K 4,0 rt Solar cable red

Lieske Part No. 1775832
Mfg Part No 730400015060QURT
EAN-Code
Manufacturer KBE
Here only 0,89 EUR
1,06 EUR incl. VAT

Further information for KBE 730400015060QURT H1Z2Z2-K 4,0 rt Solar cable red

General
Cable typeSolar cable
Cross section4 mm²
ColourRed
Outer diameter5,50 mm
Tolerance outer diameter+/- 0,20 mm
Rated voltage Uo/U DC1,5/1,5 kV
Copper stranded wireTinned, fine-stranded
Copper stranded wire classIEC 60228 class 5
Insulation and sheathchemically cross-linked, halogen-free
Norm62930 IEC 131
Suitable for underground installationYes
UV resistanceYes
Acid and alkali resistanceYes
The KBE solar cable type H1Z2Z2-K 4.0 rt is a heat-resistant silicone cable, specifically designed for use in photovoltaic systems. It is a 4 mm² thick, red-coloured cable supplied on a 500-metre reel with a metre marking. The cable complies with standard 62930 IEC 131 and is suitable for use in solar installations where high electrical load capacity and environmental resistance are required.

Applications
This cable is intended for use in photovoltaic systems, particularly in installations mounted outdoors. Due to its high water resistance, UV resistance, and resistance to acids and alkalis, it is also suitable for underground installations. The chemically cross-linked insulation and sheath ensure high mechanical and thermal stability, extending the cable's service life under harsh environmental conditions. The cable is suitable for use in industrial and commercial solar installations where high safety and reliability requirements apply.

Functions and Equipment in Detail
The cable features a Cu conductor, tinned and fine-stranded according to IEC 60228 class 5. This construction ensures high flexibility and mechanical strength, which is particularly advantageous under frequent bending stress or during installations in confined spaces. The red-coloured outer sheath serves as a clear identification for the positive conductor in solar installations, simplifying installation and maintenance. The metre marking enables precise length measurement during installation, minimizing material waste.

Technology Explained Simply
The designation H1Z2Z2-K describes the electrical and mechanical properties of the cable. The rated voltage is Uo/U DC 1.5/1.5 kV, meaning the cable is designed for direct current applications with a maximum voltage of 1.5 kV between conductor and earth, as well as between two conductors. This is typical for photovoltaic systems that generate high voltages. The insulation and sheath are chemically cross-linked, providing higher heat resistance, mechanical strength, and chemical resistance against environmental influences such as moisture, UV radiation, and chemical substances. The halogen-free composition reduces the formation of toxic smoke gases in the event of fire.

Compatibility and Accessories
The cable is designed for use in photovoltaic systems and can be combined with other components such as solar modules, inverters, and mounting systems. Use in conjunction with other cables or accessories is possible, provided the electrical and mechanical requirements of the respective standards are met. The cable is suitable for use in both open and enclosed installations, including underground installation, provided the environmental conditions comply with the relevant installation regulations.

Installation and Mounting
Installation is typically carried out from a 500-metre reel, with the metre marking facilitating accurate length measurement during laying. The cable is flexible and easy to bend, supporting installation in complex geometries. During mounting, proper securing and avoidance of mechanical damage must be ensured. The use of suitable cable protection conduits or ducts is recommended, especially for exposed installations.

Operational Advantages
The high resistance to environmental influences such as UV radiation, moisture, acids, and alkalis ensures a long service life for the cable. The halogen-free composition increases safety in the event of fire. The chemically cross-linked insulation ensures high electrical insulation, increasing the reliability of the system. The red-coloured cable simplifies identification within the system, making maintenance and fault diagnosis easier. Manufacturing in Germany ensures high product quality and compliance with European standards.

Protection Rating
The cable is suitable for outdoor and damp environments, with the chemically cross-linked insulation and sheath providing high water resistance. UV resistance protects the cable from sunlight, which can cause ageing and material degradation. Resistance to acids and alkalis makes the cable suitable for industrial environments where chemical influences may occur.

Manufacturing Quality
The cable is manufactured in Germany, ensuring high product quality and compliance with European standards. The use of tinned, fine-stranded copper conductors according to IEC 60228 class 5 ensures high electrical conductivity and mechanical strength. The chemically cross-linked insulation and sheath provide additional protection against environmental influences.
This is an offer of:

Lieske Elektronik e.K.

Reutener Str. 10
79279 Vörstetten

https://industry-electronics.com
Tel. 07666/88499-0
Fax. 07666/88499-111

Diesen Artikel finden Sie unter:
industry-electronics.com/artikel/1775832
qrcode für KBE 730400015060QURT H1Z2Z2-K 4,0 rt Solar cable red