| General |
| Thread diameter | 3,2 mm |
The Kaiser device screw 2472-15 is a fastening screw specifically developed for mounting electrical devices and installation components in distribution boxes, enclosures or other device housings. With a length of 15 mm and a thread diameter of 3.2 mm, it is suitable for securely fastening components that feature a matching threaded hole. The screw is designed as a plus-minus screw, meaning it can be operated with either a Phillips screwdriver or an internal hex key. This dual drive design increases flexibility during installation and maintenance, as different tools can be used depending on the installer’s available equipment.
Device screw is the general term for screws specifically intended for securing electrical or electronic devices in distributors, enclosures or other housings. The
plus-minus drive allows use with both common tool types – Phillips and internal hex – thereby reducing the need to keep multiple tools on hand. The
length of 15 mm is suitable for typical mounting situations in electrical installations, where sufficient penetration depth into the housing material is required without the screw protruding too deeply or damaging the device.
The screw is made from a metallic material suitable for use in electrical installations. The designation
gvz (galvanically zinc-plated) indicates that the screw features a galvanic zinc coating, providing a certain level of corrosion protection. This is particularly important in environments where the screws are exposed to moisture or minor environmental influences, such as indoor installations or slightly damp areas. The galvanic zinc plating ensures a longer service life and prevents premature rusting.
Compatibility and accessories include a range of device boxes and connection boxes specifically designed for mounting with this screw. These include, for example, the device connection box 60/66 (item 1555-04), the device connection box 71/49 with side spaces for connections (1069-02), the connection box 70/36 without cover (1172-02), the device connection box 60/42 for nail mounting (1055-62), and the airtight device box ECON10 60/46 without device screws (1055-21). These boxes are designed to accommodate the screw 2472-15 and enable secure fastening. The combination with these boxes is typical for installing switching and distribution devices in electrical systems.
Installation is performed by simply screwing the screw into the pre-drilled threaded hole of the device or box. The screw is turned until it reaches full penetration depth into the material, with the plus-minus drive allowing use of either Phillips or internal hex tools. The galvanic zinc plating ensures the screw does not corrode quickly even under prolonged exposure in damp environments. The screw is not intended for use in aggressive environments such as highly saline air or chemically contaminated areas, as the galvanic zinc coating is insufficient in such conditions.
In operation, the screw provides stable and durable fastening, which is important for the safety of the electrical installation. The combination of appropriate length, universal drive, and corrosion-resistant coating makes it a reliable component in electrical installations. The screw is used exclusively in conjunction with the specified device boxes and similar installation components.
Technology explained simply: The plus-minus drive is a combination of Phillips (cross) and internal hex (hexagon). This allows use with both tool types, making installation more flexible. Galvanic zinc plating (gvz) is a galvanic coating with zinc that serves as a protective layer against corrosion. The length of 15 mm is sufficient for most standard installations in electrical devices and boxes, ensuring secure fastening without damaging the housing.
Operational advantages include universal usability, easy installation, and corrosion resistance. The screw can be installed without changing tools, increasing work speed. The galvanic zinc plating ensures a longer service life, especially in indoor environments with normal humidity. The screw is not suitable for outdoor use or highly corrosive environments, as the zinc coating is insufficient in such conditions.
Applications include mounting switching devices, distributors, sockets, switches and other electrical components in enclosures, distribution boxes or wall sockets. The screw is commonly used in electrical installations, building technology and industrial electrical equipment. The combination with the specified device boxes enables standardized and secure mounting in various installation scenarios.
Functions and equipment in detail include the plus-minus drive, galvanic zinc plating, and length of 15 mm. The screw is made of metal and designed for fastening into threaded holes. The drive allows use with Phillips or internal hex tools, increasing installation flexibility. The galvanic zinc plating provides corrosion protection, especially in indoor environments. The length of 15 mm is suitable for most standard applications.
Compatibility and accessories include the specified device boxes, designed specifically for mounting with this screw. The boxes are constructed to accommodate the screw 2472-15 and enable secure fastening. The combination with these boxes is typical for installing switching and distribution devices in electrical systems. The screw is not intended for other applications or devices that are not compatible with the specified boxes.
Installation and mounting is performed by screwing the screw into the pre-drilled threaded hole of the device or box. The screw is turned until it reaches full penetration depth into the material, with the plus-minus drive allowing use of either Phillips or internal hex tools. Installation typically requires no additional tools or aids. The screw is not intended for use in materials without pre-drilled holes.
Operational advantages include universal usability, easy installation, and corrosion resistance. The screw can be installed without changing tools, increasing work speed. The galvanic zinc plating ensures a longer service life, especially in indoor environments with normal humidity. The screw is not suitable for outdoor use or highly corrosive environments, as the zinc coating is insufficient in such conditions.