Further information for Kaiser Nienhaus 338000
The REG-Control central control system is a fully functional yet cost-effective, house-wide roller shutter, blind and awning control system. With connection options for up to 12 motors, 12 individual controls, 3 group controls, a central control and all sensors, this control system leaves nothing to be desired. Each connected motor can be assigned one of the motor types 'roller shutter', 'blind' or 'awning' using a menu, which allows the pre-programmed operating logic (e.g. automatic counter-rotation and inching operation for blinds, automatic fabric relief for awnings) to be used. The menu can also be used to assign different sensors and groups to the individual motors and to store timers and running times. To expand the system, additional devices of the same type or small extension modules (item no. 338100 + 338200) can be easily connected using a network cable. This means that even large objects such as schools or public buildings can be networked quickly and clearly. If the system is supplemented with up to 3 sun sensors (for 3 facades), a wind sensor and a twilight sensor, the full potential of the control system is revealed. For the sun command, running times and thus the desired lowering height can be stored individually for each motor. The entire automatic system (except wind) can be activated and deactivated using an additional ON/OFF switch. The individual, group and central controls work in self-holding mode (individual controls for blinds with inching mode). The menu-guided setting is clear and easy to learn. No special hardware or software is required for the initial setting or for later changes, which makes small changes to the daily switching times particularly easy. The connectable buttons do not require an external power supply, as the potential is provided by the control system. The supply and switching voltage is 230V (50Hz). The practical plug-in terminals can be easily fixed and released again. The device is designed for use on the DIN rail and the total width is 216mm (12 HP). Dimensions 216x88x58