| General |
| Nominal voltage | 230 V AC |
| Mains frequency | 50/60 Hz |
| Output voltage | 24 V AC |
| Output current | 1 A |
| Degree of protection | overload and short-circuit protection via thermal switch |
| Built-in width | 72 mm |
| Housing shape | REG housing 4 TE |
| Connection type | Screw terminals |
| Cable cross-section solid | 0,5...4 mm² |
| Cable cross-section fine-stranded with ferrule | 0,14...2,5 mm² |
| Cable cross-section fine-stranded without ferrule | 0,34...4 mm² |
| Ambient temperature | -5...+40 °C |
| Storage/transport temperature | -25...+70 °C |
| Relative humidity | max. 93 % r.h. |
The JUNG power supply WS SV 10 (manufacturer part number WSSV10) is a compact device intended for use in sub-distribution boards, providing power to EIB/KNX-compatible sensors and system components. It is specifically designed to supply weather stations such as part number WSK 100 REG, the combination sensor WS 10 KS, the universal weather station (part number 2225 WS U), the home weather station (part number 2224 WH), as well as analog inputs (part number 2214 REG A) and analog outputs (part number 2204.01 REGA). The device is housed in a REG enclosure with a mounting width of 72 mm (4 TE) and is mounted on a DIN rail in accordance with DIN EN 60715.
Applications
This power supply is designed for use in home automation systems, particularly in installations controlled via EIB/KNX technology. It supplies sensors and modules requiring an operating voltage of AC 24 V, and is therefore a central component in the power supply chain of intelligent building systems. It is typically used in sub-distribution boards, where multiple devices are connected and powered from a central power source.
Functions and Equipment in Detail
The device features two internally connected outputs, each delivering an AC 24 V voltage. The maximum output current is 1 A, sufficient to power several small sensors or modules simultaneously. Power is supplied from the mains voltage AC 230 V ~, with a supported frequency of 50/60 Hz. For safety, the device is equipped with a thermal switch providing overload and short-circuit protection. This protects connected devices and prevents damage in case of power overload.
Technology Explained Simply
The power supply converts the mains voltage of 230 V AC into a safe, sensor-compatible voltage of 24 V AC. The two outputs are internally connected, functioning as a single power source. The screw terminals allow for secure and reliable connections with cables of various cross-sections: solid wire from 0.5 to 4 mm², fine wire with wire end ferrules from 0.14 to 2.5 mm², and fine wire without wire end ferrules from 0.34 to 4 mm². The device’s temperature and humidity resistance (ambient temperature -5 to +40 °C, relative humidity up to 93 % r. H. without condensation) makes it suitable for indoor use, where environmental conditions remain within the specified limits.
Compatibility and Accessories
The power supply is specifically developed for the mentioned weather stations and analog modules used in EIB/KNX systems. Compatibility is ensured by the manufacturer’s specifications, allowing devices to be directly connected to the power supply outputs.
Mounting and Installation
Mounting is done on a DIN rail in accordance with DIN EN 60715, typically within a sub-distribution board. The mounting width of 72 mm (4 TE) allows for compact placement alongside other components. The connection terminals are designed for various cable cross-sections, enabling flexible wiring. Installation does not require special tools, but compliance with electrical safety regulations during wiring and mounting is mandatory.
Operational Advantages
The integrated protection via the thermal switch ensures reliable and safe power supply. The combination of two internally connected outputs allows for flexible use, for example, powering multiple sensors or providing redundancy. The compact design and DIN rail mounting facilitate integration into existing distribution systems. The operating voltage of 24 V AC is a standard in home automation, ensuring compatibility with a wide range of devices.