| General |
| Nominal voltage AC | 9...36 V |
| Nominal voltage DC | 12...48 V |
| Operating frequency | 50 Hz |
| Ambient temperature | 0...+40 °C |
| Protection class | II |
| AC power consumption | 2 x 1,5 VA |
| DC power consumption | 2 x 1,0 W |
| Connection type | Screw terminals |
| Maximum clampable conductor cross-section | 2 x 2.5 or 1 x 4 mm² |
| Connections | F1, ¿, F2 |
The JUNG SV 539-948 LED is a specially designed
power supply for LED light signals in the field of home automation. The device is intended exclusively for powering LED signals with the article number series ..539.. and is not intended for other applications. It is not dimmable and is connected via screw terminals. Mounting is done using screw fastening, with no mounting claws provided.
Applications
The power supply is intended for use in electrical installations indoors, particularly in building automation systems, where LED light signals serve as visual feedback or status indicators. The ambient temperature must be between 0 °C and +40 °C. The operating voltage is designed flexibly to support both alternating and direct current, enabling adaptation to various networks and power sources.
Functions and equipment in detail
The device supplies the required voltage for two LED light signals, with power consumption varying depending on the operating mode. When operated with alternating current (AC), the power consumption is 2 × 1.5 VA; with direct current (DC), it is 2 × 1.0 W. The connections are designated as F1, ¿, F2, where ¿ represents the ground connection. The protection class is II when the cover is mounted, providing a certain level of safety against electrical contact.
Technology explained simply
The power supply supports a nominal voltage of AC 9 to 36 V at 50 Hz and DC 12 to 48 V. This allows use in various electrical systems, such as EIB or KNX installations, where different voltage sources are present. The screw terminals enable a secure and mechanically stable connection. The maximum cross-section of the conductors that can be clamped is 2 × 2.5 mm² or 1 × 4 mm², allowing use with standard installation conduits and cables in electrical work.
Compatibility and accessories
The power supply is designed exclusively for LED light signals with the article number series ..539.. It is not suitable for other signal types or light sources. Compatibility is limited to the specific product series, with connections made via the designated terminals F1, ¿, F2.
Mounting and installation
Installation requires connection via screw terminals, with the maximum conductor cross-sections to be observed. The ambient temperature of 0 to +40 °C must be maintained to ensure proper function.
Advantages in operation
The power supply provides reliable power for LED light signals in home automation systems. Support for both AC and DC voltages increases flexibility when integrating into existing systems. Protection class II with mounted cover ensures safe operation. The non-dimmable design is suitable for applications requiring constant light output.