Room thermostat (heating/cooling) 230 V
Room thermostat (heating/cooling) 230 V
Intended use
¦ Electronic room temperature controller for controlling electrothermal actuators for 230 V ~ (e.g. item no. TSA 230 NC WW)
¦ Control of the room temperature in closed rooms
¦ Installation in device box with dimensions according to DIN 49073
Product features
¦ Manual setting of a comfort temperature
¦ Temperature limit of the comfort temperature adjustable
¦ Manual switching off of the temperature control
¦ Input terminal for activating the setback temperature (ECO) via central clock
¦ Input terminal for activating the cooling mode via central control
¦ Manual activation of the cooling mode
¦ Internal temperature sensor
¦ Frost protection function
¦ Silent switching
¦ Temperature drop detection (calling up the frost protection temperature when the window is opened)
¦ Mode of operation of the controller output: pulse width modulation (PWM) or two-point
¦ Adaptation to valves (normally open or normally closed)
¦ Offset setting ± 3 °C (correction value for the measured temperature)
¦ Valve protection function (valve opens and closes once a week)
¦ Multi-coloured status LED
¦ Permanent operation of the LED possible
Technical data
Nominal voltage: AC 230 V ~, 50/60 Hz
Switching current: max. 100 mA
Connected load: 20 W
Standby power: &,lt, 0.5 W
Temperature range: approx. +5 ... +30 °C
Installation height: 1.50 m
Number of actuators: 1 ... 10
Cable length: max. 100 m
Ambient temperature: -5 ... +45 °C
Storage/transport temperature: -25 ... +70 °C
Manufacturer: JUNG