JUNG NRSLS0834WW, EAN: 4011377055315

JUNG NRSLS0834WW Emergency Call Set alpine white

Security Technology > Paging systems / nurse call

JUNG NRSLS0834WW Emergency Call Set alpine white

Lieske Part No. 137215
Mfg Part No NRSLS0834WW
EAN-Code 4011377055315
Manufacturer JUNG
Here only 344,69 EUR
410,18 EUR incl. VAT

Further information for JUNG NRSLS0834WW Emergency Call Set alpine white

General
Operating voltage24 V DC
ComponentsPull switch, call module, release switch, power supply
Frame1-way, Series LS
Mounting methodScrew mounting
Mounting clawsNone
Indicationred LED, buzzer, red calming lamp
Signal modessteady light/continuous tone, flashing light/pulsing tone
NormDIN VDE 0834
Accessory compatibilityNRSLS0834ZTWW, NRSAS0834WW
The JUNG emergency call set NRSLS0834WW is a fully pre-configured system for the emergency call function in accessible WC facilities. It includes the necessary components for safe and reliable alarm triggering: pull switch, call module, reset switch, and power supply. The system is designed in accordance with the safety requirements of the DIN VDE 0834 standard and supports individuals requiring assistance in sanitary areas. The components are modular, enabling flexible installation and expansion of the system. The set is delivered with a 1-way frame from the LS series, allowing for a uniform visual design throughout the building. Installation is carried out using screw fastening, without mounting claws.

Applications
This emergency call system is specifically designed for accessible WC facilities, where rapid and reliable alarm triggering is required in emergencies. It is suitable for facilities such as hospitals, nursing homes, senior living facilities, or public toilets with barrier-free equipment. Installation takes place in the bathroom or WC area, with the pull switch positioned so that it is easily accessible to users—even in the middle of the room on the ceiling. The call module is mounted outside the room, for example next to the WC door or corridor door, to make the emergency call signal visible and audible. The reset switch is installed in the same room, near the door, to allow staff to deactivate the call.

Functions and Equipment in Detail
The pull switch enables triggering of an emergency call via a pull cord, which is easy to operate. Upon successful activation, a red reassurance lamp lights up on the switch, providing visual feedback to the user. The call module signals the triggered emergency call visually via a red LED and acoustically via a buzzer. The signals can be switched between steady light/continuous tone and flashing light/pulsing tone, supporting different alarm levels or operating modes. The reset switch allows staff in the room to deactivate the emergency call signal. The power supply provides the entire system with a direct voltage of 24 V DC.

Technology Explained Simply
The system components are connected via an electrical network powered by the power supply with 24 V DC. Signals are transmitted between the units via cabling. The red LED on the call module and the reassurance lamp on the pull switch serve as visual feedback. The buzzer generates an audible signal, which can be adjusted via the switching function between continuous tone and pulsing tone. This can be installed in a staff or reception room and features a green button for presence indication and a yellow button to suppress the acoustic signal of the call module for 20 seconds.

Compatibility and Accessories
The emergency call set is compatible with frames from the AS/A, CD, or LS series, enabling a uniform design throughout the entire building. The frames from the LS series are included in the set’s delivery scope.

Installation and Mounting
Installation is carried out using screw fastening, without using mounting claws. Component positioning follows usage requirements: the pull switch is mounted in the WC area so that it is easily accessible to users, even in the middle of the room on the ceiling. The call module is installed outside the room, for example next to the door. The reset switch is mounted in the same room, near the door. Cabling is carried out according to the electrical connection diagrams, with the power supply providing the operating voltage of 24 V DC.

Operational Advantages
The system provides reliable and rapid alarm triggering in emergencies, with visual and acoustic signaling ensuring the assistance signal is perceived. The switching function between steady and flashing signals allows adaptation to different operating conditions. The modular design and compatibility with various frame series enable flexible and aesthetically uniform integration into existing building installations. Integration into a larger emergency call system is possible through the availability of service room units and additional modules.
This is an offer of:

Lieske Elektronik e.K.

Reutener Str. 10
79279 Vörstetten

https://industry-electronics.com
Tel. 07666/88499-0
Fax. 07666/88499-111

Diesen Artikel finden Sie unter:
industry-electronics.com/artikel/137215
qrcode für JUNG NRSLS0834WW Emergency Call Set alpine white