JUNG NRSLS0834AT, EAN: 4011377055483

JUNG NRSLS0834AT push-button switch white

JUNG NRSLS0834AT push-button switch white

Lieske Part No. 578729
Mfg Part No NRSLS0834AT
EAN-Code 4011377055483
Manufacturer JUNG
Here only 44,17 EUR
52,56 EUR incl. VAT

Further information for JUNG NRSLS0834AT push-button switch white

General
Product typestop button
MaterialThermoplastic
Mounting typeScrew mounting
Mounting clawsNone
FrameNone
The JUNG reset button type NRSLS0834AT is an installation component for emergency call systems, installed in rooms where the pull cord switch is located. It is used to reset an activated call by assisting personnel, for example, next to a door in the same room. The reset button is frameless and mounted using screw fastening, with no mounting claws provided. The housing is made of thermoplastic, a robust plastic material suitable for use in technical installations.

Applications

The reset button is used in facilities where emergency call systems with manual reset are required, such as nursing homes, hospitals, or other healthcare facilities. It is intended for indoor installation, where personnel can quickly and easily operate it to end an activated emergency call. Installation takes place in close proximity to the pull cord switch to enable rapid response.

Functions and Equipment in Detail

The reset button enables the manual reset of an emergency call triggered by a pull cord switch. It is not connected to its own alarm device but serves exclusively as an operating element to provide feedback to the emergency call system. Operation is performed by pressing the button, which causes the system to mark the call as reset. The screw fastening allows for secure mounting on a wall or other solid surface.

Technology Explained Simply

The reset button works in conjunction with an emergency call system activated by a pull cord switch. When the pull cord switch is activated, a signal is sent to the system, triggering the alarm. The reset button serves as a feedback element: when personnel consider the emergency call resolved, they operate the reset button, which causes the system to clear the alarm status. The use of thermoplastic as material ensures sufficient mechanical stability and resistance to everyday operational stresses.

Compatibility and Accessories

The reset button is designed for use with emergency call systems from JUNG, particularly in combination with pull cord switches from the same manufacturer. It is part of an integrated system that enables clear assignment between the pull cord switch and the reset button. Installation takes place in the same room, with positioning next to a door being common.

Mounting and Installation

Mounting is done using screw fastening on a suitable wall or base surface. Installation takes place in close proximity to the pull cord switch to ensure rapid response by personnel. Positioning should be chosen so that the reset button is easily accessible without impairing accessibility.

Advantages in Operation

The reset button enables clear and rapid resetting of emergency calls by personnel, thereby avoiding unnecessary alarms. The simple operation and robust construction from thermoplastic ensure reliable performance in daily operation. Integration into existing JUNG emergency call systems guarantees compatible and uniform system architecture, simplifying maintenance and servicing. The screw fastening provides secure mounting that meets the requirements of professional use.
This is an offer of:

Lieske Elektronik e.K.

Reutener Str. 10
79279 Vörstetten

https://industry-electronics.com
Tel. 07666/88499-0
Fax. 07666/88499-111

Diesen Artikel finden Sie unter:
industry-electronics.com/artikel/578729
qrcode für JUNG NRSLS0834AT push-button switch white