ETS product family Displays
Product type Signaling and control panel
The panel with aluminum housing and high-quality glass front has 24 independent capacitive sensor buttons and 24 RGB LEDs for status display, which can be labeled using foil strips.
In addition to the switching/button, dimming, blind and scene functions, value transmitter functions are also possible. The separately parameterizable LEDs can light up red, green or blue and thus, for example, signal different states of the KNX system depending on the limit value. A lock function can be used to lock specific buttons, columns or the entire panel. Acoustic signals when buttons are pressed and for alarms can be parameterized. The MBT 2424 is installed in a 2-way flush-mounted device box or in the surface-mounted installation housing and can be completely configured in the ETS. A drilling template is available for installation. The assigned functions are marked using exchangeable labeling strips. Printing is done using the JUNG labeling tool. The front glass panel is attached with four 2-hole M3 screws. The bit required for installation is included in the scope of delivery.
Product features
Touch sensor functions Switching, dimming, blind control, value transmitter, scene call, etc.
High-quality glass surface with 24 sensor surfaces
Operation by touching the sensor surfaces
Labeling with slide-in strips
Status display with 24 LEDs, color red, green or blue, can be parameterized
Acoustic signal display, e.g. for pressing a button
Fault message when dismantling
Logic and time functions
Integrated bus coupling unit
Supply via separate power supply (item no. NT 2405 VDC) or the auxiliary voltage output of the KNX power supply