Further information for JUNG LSCD10911ST KNX Switch 1-way
General
KNX medium
TP 256
Nominal voltage
DC 21 ... 32 V SELV
Power consumption KNX
4,9 ... 8,2 mA
Power consumption with push-button extension
6,6 ... 9,4 mA
Power consumption with external switching contacts
7,7 ... 11 mA
Protection class
III
Ambient temperature
-5 ... +45 °C
Storage/transport temperature
-25 ... +70 °C
Switch extension connection
1
Switch extension cable type
J-Y(St)Y 2 x 2 x 0,8 mm
Taster extension cable length
max. 30 m
External switching contacts
max. 20
KNX connection
Connection terminal
KNX connection cable
EIB-Y (St)Y 2x2x0,8
Operating concept
toggle switch or button, adjustable
Key scanning
single- or dual-surface operation, adjustable
Functions per control surface
one or two
Status-LED
red, green, blue, adjustable
LED brightness
Adjustable
With alarm function
yes, optionally with acknowledgement
Locking function
yes, locking or function switching
KNX Data Secure
compatible from ETS 5.7.3
Updateable
yes, with ETS Service App
Commissioning mode
S-Mode
Safety
X-Mode
Integrated bus coupler
Room temperature measurement
Taster extension connection
Connection for installation switches/Reed contacts
The JUNG LSCD10911ST is a KNX switch universal 1-way, designed for integration into building automation systems according to the KNX standard. It is used in conjunction with toggles of article numbers ..101.. and ..101 KO5.. from the CD and LS series. Project planning and commissioning are carried out via ETS5 software or newer versions. The switch is used to control various loads, such as switching lights on and off, dimming, controlling blinds, displaying brightness or temperature values, and recalling and storing light scenes. It is intended for mounting in a device box with dimensions according to DIN 49073.
Applications
This switch is suitable for use in intelligent building systems, particularly in residential and office buildings, where central control of lighting, blinds, and other electrical loads is required. It enables control of individual circuits, dimmers, blind drives, or temperature control functions. The integrated room temperature measurement allows its use as a sensor in combination with heating or air conditioning systems. The functions can be individually configured via the ETS software, enabling the switch to be adapted to different requirements.
Functions and equipment in detail
The switch features a control concept that can be individually set for each control surface between toggle and push-button. The button evaluation can be switched between single-surface or dual-surface operation, enabling different operating modes. One or two functions can be assigned per control surface. An integrated status LED per control surface is included, whose color (red, green, blue) and brightness can be set via the ETS software. The LED provides visual feedback on the operating status. The switch includes an integrated bus coupler, enabling communication over the KNX network.
Technology explained simply
The switch operates in the KNX medium TP 256, enabling transmission over twisted-pair cables. The rated voltage is DC 21 to 32 V SELV, ensuring a safe, low-voltage power supply. The current consumption ranges from 4.9 to 11 mA depending on configuration. Protection class III indicates that the switch is designed for use in electrically safe systems. The operating ambient temperature ranges from -5 °C to +45 °C, while storage and transport temperature ranges from -25 °C to +70 °C. The switch is KNX Data Secure compatible from ETS 5.7.3, enabling encrypted communication. Firmware updates are possible via the ETS Service App.
Compatibility and accessories
The switch can be connected to a switch extension, with a maximum cable length of 30 m. The cable type used is J-Y(St)Y 2x2x0.8 mm. Additionally, connection of installation switches or reed contacts is possible, with a maximum of 20 external switching contacts allowed. As suitable accessories, the LSCD10921ST KNX switch universal 2-way is offered, enabling expansion of the control surface.
Mounting and installation
Mounting is carried out in a device box with dimensions according to DIN 49073. Connection to the KNX network is made via a connection terminal, with the recommended connection cable being EIB-Y (St)Y 2x2x0.8. Installation requires integration into an existing KNX network, with project planning and commissioning carried out via ETS5 or a newer version.
Advantages in operation
The switch offers high flexibility through configurable control concepts, LED colors, and brightness levels. The integrated room temperature measurement extends functionality. The alarm function with optional acknowledgment via any button and the lock function for individual or all functions increase safety and user-friendliness. Compatibility with KNX Data Secure and the ability to perform firmware updates via the ETS Service App ensure secure and up-to-date operation.