| General |
| Degree of protection | flame retardant |
| Maximum depth of installation | 34 mm |
| Colour | alpine white |
| Compatibility | for UP devices with covers from the LS series (except LS 1912, key switches ..15, selector switches, SEV sockets type 13) |
| Spare part | mounting housing 581 A, strain relief 58 A ZUG |
The article LS581AWW from JUNG is a surface-mounting housing for single devices from the LS series. It serves as a base for the installation of switches, socket outlets, and other electrical components in surface mounting and is supplied with an integrated frame and flame-retardant base plate. The housing is available in alpine white and matches visually with the covers of the LS series. It is specifically designed for use with UP devices equipped with covers from the LS series, although certain devices such as toggle switch LS 1912, key switches with flush cylinder covers (article numbers ending in ..15), step switches, and SEV socket outlets type 13 are not compatible.
Applications
The mounting housing LS581AWW is used in the electrical installation sector, particularly in residential and commercial buildings, where clean and aesthetic surface mounting is required. It enables secure mounting of single devices on walls or plaster, with the integrated base plate and frame enhancing mechanical stability and fire protection. The flame-retardant design meets requirements for electrical components in indoor environments, especially in areas with increased safety requirements.
Functions and Equipment in Detail
The housing features an integrated flame-retardant base plate, which improves fire protection in the installation area. The integrated frame ensures precise alignment and secure attachment of the cover. Dimensions are 81 mm x 81 mm x 47 mm, with a maximum installation depth of 34 mm. These dimensions ensure compatible mounting with corresponding devices from the LS series. The housing is available as a replacement part, with the mounting housing itself ordered under article number 581 A and the strain relief under 58 A ZUG.
Technology Explained Simply
The integrated base plate is made from flame-retardant material, meaning it does not easily ignite when exposed to heat, thus reducing fire risk in the installation area. The integrated frame ensures a mechanically stable connection between the housing and the cover, guaranteeing secure and long-lasting operation. The dimensions are chosen to be compatible with standard covers from the LS series, with the maximum installation depth of 34 mm allowing installation in walls of varying thicknesses.
Compatibility and Accessories
The mounting housing is intended for UP devices with covers from the LS series, but is not compatible with toggle switches LS 1912, key switches with flush cylinder covers (article numbers ending in ..15), step switches, or SEV socket outlets type 13. Compatible accessories include the surface-mount cap 3-way with frame (LS583AWW) and the surface-mount cap 2-way with frame (LS582AWW), both also available in alpine white. These enable consistent visual design in multiple installations.
Mounting and Installation
Installation is performed in surface mounting, with the housing recessed into the wall or plaster. The maximum installation depth of 34 mm must be observed to ensure correct fixation. The integrated base plate and frame facilitate installation and ensure a secure connection with the cover.
The operational advantages lie in mechanical stability, fire protection provided by the flame-retardant base plate, and visual harmony with other components of the LS series. Standard dimensions and compatibility with LS series covers simplify planning and execution of electrical installations. Use as a replacement part enables easy maintenance and interchangeability without altering the entire installation.