New system function: fully encrypted radio transmission (AES-CCM) from eNet Server software version 2.0
Intended use
Control of electrically operated curtains, such as blinds, roller shutters and awnings
Operation with suitable eNet radio transmitters
Installation in device box according to EN 60670-1 in combination with a suitable cover
Installation in surface-mounted housing or installation adapter (item no. FM-EBG) for false ceilings
Product features
Operating mode switch for switching to blind actuator, roller shutter actuator or parameterization via eNet server
Positioning of blinds and slats via scene call
Position for sun protection and twilight can be saved
Status feedback to radio transmitter
Output can be switched with Prog button Curtain
running time can be saved
Slat reversal time can be saved
Fabric tightening for awnings
Status display with LED
Can be set with eNet server:
Reversal time when changing direction
Direction of travel can be inverted
Operating locks
Position for sun protection, twilight, lock-out protection and wind alarm
Additional functions with eNet server:
Fully encrypted radio transmission (AES-CCM) from eNet Server software version 2.0
Update of device software
Repeater function
Read error memory
Nominal voltage: AC 230 V ~, 50/60 Hz
Ambient temperature: ?25 ... +70 °C
Minimum control time in
blind operating mode: 0.1 s
Roller shutter: 0.3 s
Contact type: µ
Standby power: max. 0.5 W
Running time: 1 ... 600 s
Factory setting running time: 120 s
Slat adjustment time: 0 ... 10 s Connected
load
motors: 1000 W
Connection type: Screw terminals
single-wire: 1 x 0.75 ... 4 mm2
fine-wire with wire end ferrule: 1 x 0.75 ... 2.5 mm2
Dimensions (Ø x H): 53 x 28 mm
Radio frequency: 868.0 ... 868.6 MHz
Transmission power: max. 20 mW
Transmission range in free field: typically 100 m
Receiver category: 2