| General |
| Frame type | 2-way |
| Colour | alpine white |
| Material | Duroplast |
| Degree of protection | IP44 |
| Combination possibility | Horizontal and vertical |
| Gasket flange | 551 WU |
The article CD582WW from JUNG is a flush-mounted frame for the installation of switches and socket outlets in the standard system. It is designed as a 2-gang frame and is available in alpine white. The frame is used to secure switch and socket outlet modules in plaster and enables a clean, flush installation in the wall. It is designed for horizontal and vertical combinations with other frames of the same series, allowing for flexible and aesthetically pleasing arrangements.
Applications
The frame CD582WW is intended for use in indoor environments, particularly in residential and office buildings, where proper and safe installation of electrical modules is required. It is suitable for standard installations in dry and damp rooms, with the protection rating IP44 being achieved only when a sealing flange (part no. 551 WU) is used. This protection rating safeguards against contact with fingers and against splashing water from any direction, making it suitable for bathrooms or kitchens, provided the sealing flange is installed.
Functions and Equipment in Detail
The frame is made of duroplast, a thermosetting plastic known for its high mechanical strength, heat resistance, and dimensional stability. This material choice ensures a durable and robust construction that meets the requirements of electrical installation systems. The dimensions are 81 mm in width and 152 mm in height, matching the standard size for 2-gang frames. The surface is finished in alpine white, a neutral and universally applicable color that integrates harmoniously into most interior designs.
Technology Explained Simply
The frame CD582WW is designed as a flush-mounted component, meaning it is recessed into the wall cladding so that the front face of the module (e.g., switch or socket) aligns flush with the wall surface. The possibility of horizontal and vertical combination allows for flexible design of switch and socket fields. The IP44 protection rating is only achieved when the sealing flange part no. 551 WU is additionally installed; without it, the protection rating is not guaranteed.
Compatibility and Accessories
The frame CD582WW is part of the JUNG system and can be combined with other frames from the CD58x series, including the 1-gang (CD581WW), 3-gang (CD583WW), 4-gang (CD584WW), and 5-gang frames (CD585WW), all in alpine white. These frames are designed for the same mounting method and system, ensuring a consistent and uniform installation. Combination is achieved by placing the frames side by side or stacked, with mounting surfaces aligned accordingly.
Installation and Mounting
The frame is mounted using the flush-mounted method, where it is inserted into the designated opening in the wall cladding and secured. Installation takes place before the final plastering, so the frame is embedded in the plaster. After mounting, switches or socket outlets are inserted into the frame and locked in place.
Operational Advantages
The frame CD582WW provides a stable and secure mounting base for electrical modules. The use of duroplast ensures high mechanical load capacity and weather resistance. The alpine white color allows for discreet integration into wall design. The combinability with other frames in the series enables flexible and individual design of switch and socket fields.