JUNG CD569-1UAWW, EAN: 4011377681309

JUNG CD569-1UAWW Cover 1x8pin alpine white

Installation > Switch Material > Switch Flush standard

JUNG CD569-1UAWW Cover 1x8pin alpine white

Lieske Part No. 371971
Mfg Part No CD569-1UAWW
EAN-Code 4011377681309
Manufacturer JUNG
Here only 6,44 EUR
7,66 EUR incl. VAT

Further information for JUNG CD569-1UAWW Cover 1x8pin alpine white

General
MaterialThermoplastic
Colouralpine white
Connection type1x8-pin
CompatibilityIAE/UAE connection boxes UAE 8 UPO, UAE 8 UPOK6, data socket Cat. 6, Rutenbeck UAE 8(4) UPO, UAE 8(8) UPO, UAE-Cat.5e-8 UPO OK, UAE-real.Cat.6-8 UPO OK, Telegärtner AMJ 45, UMJ 45, ISDN 1 x RJ 45 (TYP 8)
The CD 569-1 UA WW cover from JUNG is an underfloor element for use with IAE/UAE connection outlets and serves as a finishing front plate for network and data connections. The product is made of thermoplastic and available in alpine white, enabling visual harmonization with standard installation elements. It is specifically designed for 1x8-pole connections, i.e. RJ45 connectors, commonly used in data and communication technology.

Cover for IAE/UAE connection outlets
The cover is intended for use with IAE/UAE connection outlets with article numbers UAE 8 UPO and UAE 8 UPOK6. These outlets serve as installation units for network cables and data lines in underfloor applications. The cover also fits data outlets of category 6, which are also designated by article number UAE 8 UPOK6. Use is within structured cabling systems, particularly in offices, apartments and technical rooms, where a clean and professional finish of the connection outlet is required.

Compatibility with other manufacturers
The cover is not only suitable for products from manufacturer JUNG, but also for connection outlets from other brands. It fits models from Rutenbeck, including types UAE 8(4) UPO, UAE 8(8) UPO, UAE-Cat.5e-8 UPO OK and UAE-real.Cat.6-8 UPO OK. Additionally, it is compatible with connection outlets from Telegärtner, particularly models AMJ 45, UMJ 45 and ISDN 1 x RJ 45 (TYP 8). This broad compatibility enables flexible use in existing installations from various manufacturers.

Material and design
The thermoplastic material ensures high mechanical stability and weather resistance, allowing the cover to be used even in areas with increased stress. The alpine white colour corresponds to a neutral, light white tone that generally integrates well into standardized installation systems. The cover is designed for use in underfloor installations, where it closes the front opening of the connection outlet, providing a closed, clean finish.

Application areas
The cover is typically used within structured cabling systems, particularly during the installation of network connections, telephone connections or ISDN links. It is suitable for residential and commercial spaces where a professional and aesthetically pleasing finish of the connection outlets is required. Use is in combination with corresponding underfloor outlets already installed in the wall plaster.

Functions and equipment in detail
The cover primarily serves as an optical finishing function and protects the front opening of the connection outlet from dust, dirt and mechanical damage. It is not equipped with additional functions such as switches, sockets or indicator lights. Installation is done by simple snapping or screwing, depending on the construction of the underlying connection outlet.

Technology explained simply
The cover is a passive component that does not perform any electrical or electronic function. Its purpose lies exclusively in mechanical finishing and protection. The thermoplastic material provides sufficient hardness and shape stability to permanently close the front opening of the connection outlet. The alpine white colour is a standard tone in electrical installation, which generally matches with other installation elements.

Advantages in operation
Using this cover provides an optical finish of the connection outlet, increasing the safety and cleanliness of the installation. The cover protects the contact surfaces from dirt and mechanical damage, which can extend the service life of the connection outlet. Compatibility with various manufacturers facilitates integration into existing installations and reduces the need to procure specific spare parts.

Installation and mounting
Mounting is done after installing the underfloor outlet in the wall plaster. The cover is placed onto the front opening of the outlet and secured either by snap mechanisms or by screws, depending on the outlet’s construction. No additional tools or materials are required, except for those needed to secure the outlet itself.

Accessories and alternatives
As a suitable accessory, the cover 569-1UA for IAE/UAE 1x8-pole CD white is offered. This is also intended for use with IAE/UAE connection outlets and differs only in colour. The cover CD 569-1 UA WW is thus a colour variant specifically intended for use in alpine white installation systems.

Compatibility and accessories
The cover is compatible with IAE/UAE connection outlets with article numbers UAE 8 UPO and UAE 8 UPOK6, as well as with category 6 data outlets. Additionally, it fits connection outlets from Rutenbeck and Telegärtner, as described above. Use is in combination with the corresponding underfloor outlets already installed in the wall plaster.

Functions and equipment in detail
The cover is a purely mechanical component without electrical or electronic function. It serves exclusively to finish and protect the front opening of the connection outlet. Installation is done by simple placement and securing, with no additional tools or materials required.

Advantages in operation
Using this cover provides an optical finish of the connection outlet, increasing the safety and cleanliness of the installation. The cover protects the contact surfaces from dirt and mechanical damage, which can extend the service life of the connection outlet. Compatibility with various manufacturers facilitates integration into existing installations and reduces the need to procure specific spare parts.

Installation and mounting
Mounting is done after installing the underfloor outlet in the wall plaster. The cover is placed onto the front opening of the outlet and secured either by snap mechanisms or by screws, depending on the outlet’s construction. No additional tools or materials are required, except for those needed to secure the outlet itself.

Accessories and alternatives
As a suitable accessory, the cover 569-1UA for IAE/UAE 1x8-pole CD white is offered. This is also intended for use with IAE/UAE connection outlets and differs only in colour. The cover CD 569-1 UA WW is thus a colour variant specifically intended for use in alpine white installation systems.
This is an offer of:

Lieske Elektronik e.K.

Reutener Str. 10
79279 Vörstetten

https://industry-electronics.com
Tel. 07666/88499-0
Fax. 07666/88499-111

Diesen Artikel finden Sie unter:
industry-electronics.com/artikel/371971
qrcode für JUNG CD569-1UAWW Cover 1x8pin alpine white