Complete with cover and integrated frame
without extension input.
Can only be installed as a single device, not suitable for combinations!
Intended use
Switching and dimming incandescent lamps, HV halogen lamps and phase-cut dimmable HV LED lamps
Operation with suitable cover
Installation in device box in accordance with EN 60670-1
Product properties
Dimming principle Phase-cut
Short-circuit protection by means of a fine-wire fuse
Nominal voltage: AC 230 V ~
Mains frequency: 50 Hz
Standby power: approx. 0.2 W
Power loss: approx. 3.7 W
Ambient temperature: ?5 ... +45 °C
Connected load at 25 °C
Incandescent lamps: 20 ... 200 W
HV halogen lamps: 20 ... 200 W
HV LED lamps dimmable: typically 3 ... 40 W
Ohmic and HV LED: typically 3 ... 40 W
Power reduction
for surface mounting: ?5 %
per 5 °C exceeding 35 °C: ?10 %
for installation in wood or drywall: ?15 %
Fine-wire fuse: T 800 mA H 250
Connection type: screw terminals
single-wire: 1 x 0.5 ... 2.5 mm2
fine-wire without wire end ferrule: 1 x 0.5 ... 2.5 mm2
fine-wire with wire end ferrule: 1 x 0.5 ... 2.5 mm2
changeover circuit: not possible