Universal
for bus coupler 3 Art. No.: 2073 U
ETS product family Phys. Sensors
Product type motion detector
Intended use
Control of lighting and other electrical consumers in interior spaces as required
Installation on bus coupler 3 (item no.: 2073 U)
Product features
Automatic switching of lighting, depending on heat movement and ambient brightness
2 PIR sensors
Detection range 180°
Integrated brightness sensor
Switch-off brightness adjustable
Output functions: switching, staircase function, switching with forced position, value transmitter, light scene extension, operating mode specification for room temperature controller
Extension of the detection range by operating several devices as main and extension units
Sensitivity manually adjustable
Status LEDs
Manual switching on the device
Detection field can be half dimmed (aperture or parameter setting)
Additional features Version 'Universal':
Manual operation with IR remote control possible (item no. KNX PM FB IR)
5 function blocks for motion detection, each with 2 outputs
Function blocks can be switched, e.g. for day/night operation
Brightness sensor function with 3 limit values
Alarm message when disconnected from Bus coupler
temperature measurement
Current consumption KNX: 3 ... 10 mA
Ambient temperature: ?5 ... +45 °C
Storage/transport temperature: ?25 ... +70 °C
Relative humidity: 10 ... 100 % (no condensation)
Protection class: III
Installation height: 1.10 m
Detection angle: 180°
Brightness sensor
measuring range: approx. 1 ... 1,000 lx
Temperature sensor
measuring range: ?5 ... +45 °C
Accuracy: ± 1 K