JUNG 639VW, EAN: 4011377321205

JUNG 639VW Toggle Switch 1P waterproof

Installation > Switch Material > Waterproof wall switch

JUNG 639VW Toggle Switch 1P waterproof

Lieske Part No. 372165
Mfg Part No 639VW
EAN-Code 4011377321205
Manufacturer JUNG
Here only 27,82 EUR
33,10 EUR incl. VAT

Further information for JUNG 639VW Toggle Switch 1P waterproof

General
Degree of protectionWG600
Operating voltage250 V ~
Nominal current10 AX
Number of poles1
Terminal typeSpring clamps
Max. conductor cross section2,5 mm²
Connection terminalsaccording to DIN VDE 0632 (EN 60669)
Reverse lockYes
The JUNG 639VW is a water-protected, surface-mounted blind toggle switch in protection class WG600, designed for use in areas with increased humidity or outdoors. The device is single-pole and intended for controlling blinds or similar drives, with an integrated reverse lock ensuring that rapid direction changes of the drive are prevented. The connection terminals comply with the standard DIN VDE 0632 (EN 60669) and are designed for rigid conductors up to 2.5 mm². The spring terminals enable a secure and reliable connection without additional tools.

Applications

The blind toggle switch 639VW is designed for use in water-protected installations, particularly in areas where splashing water or humidity may occur, such as terraces, balconies, greenhouses, or exterior facades. The protection class WG600 corresponds to protection against splashing water from any direction (equivalent to IP44), making it suitable for outdoor use. The device is rated for an operating voltage of 250 V ~ and a nominal current of 10 AX.

Functions and Equipment in Detail

The switch features a reverse lock, which prevents the drive from being damaged by too rapid switching. This is particularly important for mechanical blinds, where sudden direction changes can cause wear or malfunction. The spring terminals are designed for rigid conductors up to 2.5 mm² and ensure a stable electrical connection. The connection terminals comply with the standard DIN VDE 0632 (EN 60669), enabling standardized and secure installation.

Technology Explained Simply

The protection class WG600 means the device is protected against splashing water from any direction, making it suitable for outdoor use or in humid indoor environments. The reverse lock is a mechanical safety feature that prevents the blind drive from being damaged by too rapid switching of the toggle position. The spring terminals allow for easy and secure connection of conductors without additional tools, with a maximum cross-section of 2.5 mm² for rigid conductors.

Compatibility and Accessories

For use with the blind toggle switch 639VW, compatible accessories are available, including the connector 192 for water-protected devices WG600, as well as the insert with screw connection M20x1.5 (item 193-2) for the same device class. These components enable secure and waterproof wiring and are designed for installation in water-protected systems.

Installation and Mounting

The switch is designed for surface mounting and is directly attached to the wall or another substrate. The housing dimensions are 68 x 70 x 45 mm. Wiring is done via the spring terminals, which are designed for rigid conductors up to 2.5 mm².

Operational Advantages

The blind toggle switch 639VW provides reliable and safe control of blinds, especially in humid or outdoor environments. The reverse lock protects the drive from mechanical wear, and the spring terminals enable quick and secure wiring. The protection class WG600 ensures high resistance to splashing water, increasing the device’s lifespan and improving operational safety.
This is an offer of:

Lieske Elektronik e.K.

Reutener Str. 10
79279 Vörstetten

https://industry-electronics.com
Tel. 07666/88499-0
Fax. 07666/88499-111

Diesen Artikel finden Sie unter:
industry-electronics.com/artikel/372165
qrcode für JUNG 639VW Toggle Switch 1P waterproof