| General |
| Degree of protection | IP44 |
| Operating voltage | 250 V AC |
| Nominal current | 10 A |
| Conductor cross section | 2,5 mm² |
| Switch function | Off-Change |
| Status indicator | Glow lamp |
| Colour of lamp hood | Red |
| Connection terminals | Spring clamps |
| Norm | DIN VDE 0632 (EN 60669) |
| Water protection class | WG 600 |
The JUNG 606 KOW is a waterproof surface-mounted toggle control switch from the WG 600 series, designed for use in damp or wet environments. It serves as a universal switch with OFF-Exchange function, whereby the switch can be operated in two positions: off and on. The switch function is visually supported by a red cap (part no. 33 NR) and an integrated neon lamp (part no. 90), making the operating status clearly visible. The switch is rated for an operating voltage of 250 V AC and a nominal current of 10 A, making it suitable for typical applications in households and industrial environments.
Applications
The switch is intended for use in areas where a certain level of moisture exposure is expected, such as kitchens, bathrooms, laundry rooms, or industrial environments with splashing water. The protection rating corresponds to IP44, which provides protection against splashing water from any direction. This makes it suitable for outdoor areas or indoor spaces with increased humidity, as long as there is no direct water jet exposure. The designation WG 600 refers to the water protection class defined in the standard DIN VDE 0632 (EN 60669).
Functions and Equipment in Detail
The switch features spring terminals suitable for rigid conductors up to 2.5 mm². These terminals ensure a secure and reliable connection of electrical wiring. The connection terminals comply with the requirements of the standard DIN VDE 0632 (EN 60669), ensuring standardized and safe installation. The red cap and neon lamp serve as visual status indicators: the lamp lights up when the switch is turned on, immediately indicating the operating status.
Technology Explained Simply
The switch function OFF-Exchange means that the switch can be operated in two positions: in one position, the load is switched off, and in the other, it is switched on. The neon lamp, which lights up in the on position, serves as a visual confirmation. The spring terminals allow for easy and secure connection of wires without additional tools. The IP44 protection rating safeguards against splashing water, making the switch suitable for damp environments, although not for direct water jet exposure or submersion.
Compatibility and Accessories
The switch is part of the WG 600 series and can be combined with other products from this series. The red cap (part no. 33 NR) and the neon lamp (part no. 90) are available as separate components and are used for visual status indication. The connection terminals are standardized according to DIN VDE 0632 (EN 60669), ensuring compatibility with other devices complying with this standard.
Mounting and Installation
The switch is designed as a surface-mounted device and is mounted on the wall. Installation is carried out by securing it in a suitable surface-mounted, flush-mounted, or surface-mounted distribution box. The spring terminals allow for easy and secure connection of the wires. An N conductor is required to ensure the switch function operates correctly. Installation must be carried out in accordance with the requirements of DIN VDE 0632 (EN 60669).
Operational Advantages
The switch provides a clear visual status indication via the neon lamp, which lights up when the switch is turned on. The spring terminals enable quick and secure connection of wires. The IP44 protection rating makes it suitable for damp environments, allowing use in areas with increased humidity. The standardization of connection terminals according to DIN VDE 0632 (EN 60669) ensures safe and compatible installation.